Catalog number needed - bolt between main and sub frame

[doutsh]

Hi,
In my 125 (and I think it's the same at least in all 2 strokers) the subframe is attached to the frame on the bottom side with 2 bolts + nuts + special washers from each side.
I can't seem to find these parts in the microfiche...
I need the nut side, it's a special nut with 10mm head and long spacer attached to it.
Thanks!

[cbutler]

T2108001 is the nut looks to be the same from 01-11

this is the parts fiche from GoFasters just put in the year.


http://partsfinder.onlinemicrofiche....?make=gasgasdb

[gasgasman]

The nut is slimmer than a conventional nut, so it will clear the swingarm.
If you can't find one, maybe grind the conventional nut down.

[doutsh]

Thank you for the help, but I don't think it is the same part.
In the 2013 the nut comes with some kind of spacer, something like this:

[gasgasman]

That's a Rivnut. It is not serviced separately. Not to say you can't replace it.
You can buy the Rivnuts and replace them yourself. They do require a special tool for the installation.

[doutsh]

I don't think it's a rivnut
I found the part (or similar) at haines, but don't write the catalog number, and they charge 10 pounds before shippment!
This is the part: