Clutch master cylinder

[mjtursky]

Looking for options to replace the stock AJP clutch master cylinder assembly. Any suggestions for a direct bolt up? thanks in advance.

[blitz11]

Motocenter AZ has the BrakeTec (who, somehow, acquired the assets/IP of AJP) rebuild kits for the AJP master cylinder. My MC is 20 years old w/o a rebuild, but i have a kit just in case. Much cheaper alternative FWIW.

[Zman]

You need to pay attention to and match the fluid type unless you want to put the corresponding seals into the slave cylinder too. Magura and Brembo have other options.

[Anders]

Originally Posted by mjtursky

Looking for options to replace the stock AJP clutch master cylinder assembly. Any suggestions for a direct bolt up? thanks in advance.

I would suggest a Magura, as they were used on Gasgas in some models. If you get one of the same type that was used as OEM, it should fit right in.

[mjtursky]

Thank you for the replies. I purchased a rebuild kit off E-bay awhile back and it did not function. I believe it was mislabeled for the fluid I required. The seals failed in a short amount of time. Fortunately I bought a used assembly and it has been working pretty well. Was hoping to find a newer more readily available assembly. The OEM doesn't appear to protect very well for mud and debris.