GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Trials Technical Forums > Trials Engine

Trials Engine Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-28-2017, 03:51 AM
stagjim stagjim is offline
Member
 
Join Date: Mar 2013
Posts: 3
Default Jxt 200 piston & rings

Hi, have a questions regards my JXT 200, its a 1997 and yes its getting on but still a load of fun. Bought 3 months ago here in France, bought it for a green laning/ low level trialing.The engine starts 1st kick and runs well but has some top end noise, low compression and a bit of piston slap. So needs a top end rebuild. My problem is trying to source piston and rings, firstly i havent stripped yet to see if its an A or B piston, secondly been told by Gas Gas they no longer make them. Any ideas where i could get hold of the above. Or does anyone know if any of the newer models would fit.


Reply With Quote


  #2  
Old 12-28-2017, 04:10 AM
stagjim stagjim is offline
Member
 
Join Date: Mar 2013
Posts: 3
Default

Sorry should have put on post the chassis no is VTRGG169706970310
Reply With Quote
  #3  
Old 12-28-2017, 12:01 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 1,128
Default

You'll just have to try new old stock somewhere if you can find part number. My 2000 TXT was a bit noisy, a new kit quietened it down a little for about a week and went back to rattling despite measuring real tight.
__________________
'07 EC300
496 CPI Cheetah RZ/RGV hybrid
675 Street Triple R
RS125 framed MB100 racer
Stinger T125 Suzuki
Reply With Quote
  #4  
Old 12-30-2017, 09:07 AM
stagjim stagjim is offline
Member
 
Join Date: Mar 2013
Posts: 3
Default piston and rings

Oh well that was useful, would appear no one has any or knows of any new or old stock. will ride it til it breaks and move it on
Reply With Quote
  #5  
Old 12-30-2017, 09:20 AM
cbutler's Avatar
cbutler cbutler is online now
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 588
Default

Call Jim Snell he is no longer a gasgas dealer but still has tuns of parts.

http://trialspartsusa.com/
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
$333.95 for a Piston Without Rings Moto7man General Discussions & Announcements 19 04-27-2017 12:17 PM
2010 300 90 hrs. Rings or Piston also? husley Enduro Engine - 2 stroke 5 01-12-2013 04:57 PM
piston rings thenutt Enduro Engine - 2 stroke 3 06-10-2009 06:16 PM
Piston and rings EC 300 brains Enduro Engine - 2 stroke 1 08-22-2007 12:11 AM




All times are GMT -5. The time now is 10:45 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org