|
|
|||||||
| Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
 |
|
|
Thread Tools | Display Modes |
|
#1
03-18-2013, 11:15 AM
|
||||
|
||||
2013 300R, does the ignition key kill your bike...(fixed)
I have to switch it on to use the e-start, keeps running when turned off. Have to use the kill-button to stop?
Thanks Rob update: Found it, there are 2 sets of bullet connectors up by the neck under the tank. both have blk&white plugged into blk&yellow sounds crazy, they are the same color combo, but I switched them and now the ignition switch kills the bike and so does the kill button. maybe they should use different connectors - Nah! Rob, woot!!! for once  but how many other guys get their's switched, yeah, just me!!
__________________
Rob Granger / Katy, TX EC300 Breaking more things by 8:00AM than most people break all day. Last edited by rgranger; 03-21-2013 at 06:19 PM. 
|
|
#3
03-18-2013, 01:28 PM
|
||||
|
||||
|
Did you just replace it with a toggle? That is sort of what I am thinking. Almost broke off the key a few times on the '11.
__________________
Rob Granger / Katy, TX EC300 Breaking more things by 8:00AM than most people break all day.
|
|
#5
03-18-2013, 04:05 PM
|
||||
|
||||
|
sounds like the two wires for the kill switch part of my ignition switch are already disconnected
Thanks!! Rob
__________________
Rob Granger / Katy, TX EC300 Breaking more things by 8:00AM than most people break all day.
|
|
#6
03-21-2013, 10:44 AM
|
|||
|
|||
|
On mine you can turn the bike off with the key but I also noticed the tail light is running on DC power as it comes on when the key is on.
|
|
#7
03-21-2013, 11:10 AM
|
||||
|
||||
|
i tested the switch, and it shorts, i tested the yellow/green wire all the way back to the starter relay, but then things stop. I have continuity all the way from the switch back. I wonder if the pins are not in the right position. if anyone has time, can they confirm. i think these show up ok. I have 3 wires in a 4 pin connector.
Rob
__________________
Rob Granger / Katy, TX EC300 Breaking more things by 8:00AM than most people break all day.
|
|
#8
03-21-2013, 06:20 PM
|
||||
|
||||
|
Found it, there are 2 sets of bullet connectors up by the neck under the tank.
both have blk&white plugged into blk&yellow sounds crazy, they are the same color combo, but I switched them and now the ignition switch kills the bike and so does the kill button. maybe they should use different connectors - Nah! Rob, woot!!! for once but how many other guys get their's switched, yeah, just me!!
__________________
Rob Granger / Katy, TX EC300 Breaking more things by 8:00AM than most people break all day.
|
|
#10
03-21-2013, 07:27 PM
|
||||
|
||||
|
Wimpy, I think that I will, I sometimes leave the bike out where we ride overnight, nice having a key "sometimes"
__________________
Rob Granger / Katy, TX EC300 Breaking more things by 8:00AM than most people break all day.
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2013 jet help, just got the bike today, hoping for a ride in the am..but... | rgranger | Enduro Intake/Carburetion - 2 stroke | 10 | 04-17-2013 07:08 PM |
| 2013 200cc bike? | Phantomtracer | General Discussions & Announcements | 15 | 11-05-2012 09:47 AM |
| 2013 300r | Binni | General Discussions & Announcements | 11 | 10-12-2012 06:54 PM |
| Bike Dies @ Speed. Ignition???? | matt4wheels | Enduro Electrical & Wiring | 2 | 04-24-2007 11:35 AM |
| 04 300EC Ignition changed to DE Ignition | Trail Blazer | Enduro Engine - 2 stroke | 0 | 01-08-2007 01:48 AM |
Linear Mode
