|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help me select the right Mid West Engineering lever
Steve from Mid West Mountain Engineering sent this photo to choose the one that most closely matches my clutch lever, I'm thinking its the first one but it says Magura (these are his KTM levers). Has anyone run one of these successfully? What about brake? My bike is an 11 EC300, thank you.
|
#2
|
|||
|
|||
He said they wouldn't fit my 2011 AJP masters. I told him I could send him my 2005 take-offs a few months ago but he wasn't sure he could find the time to design it.
Ask him if he is ready for them and I will send them. |
#3
|
||||
|
||||
I did the Magura clutch m/c conversion on my '11 bike.
I also have the top MWME lever shown on it. I don't think any of their existing levers will fit the AJP master cylinder. |
#4
|
|||
|
|||
Darn, OK I'm really needing shorty levers and the idea of the increased leverage is cool. I just received a sweet pair of red anodized S3 levers from GF but they are the same length (clutch is even a little longer) than stock. They didn't come with bushings for the bolt holes, do you guys add these or transfer them from the old levers? I don't remember bushings being a factor on all my other bikes. Im sending them back to him anyway, maybe I'll go with the trials levers.
|
#5
|
||||
|
||||
A clutch lever for a newer GasGas trials bike should work. I put one on my 2011 XC250e. It mounted right up and was shorter than the stock lever.
|
#6
|
||||
|
||||
I have been using the Zeta levers that I get from lewisports trials.
__________________
13 GasGas 300XC, CLake and now Rekluse 17 Beta 430 RRS, Clake 19 Vertigo 300 03 H-D Nightrain www.newoodsriders.com You Can't Out Run Death Forever But You Can Make the BASTARD Work For It! Enjoy Life, Have Fun and Play Hard |
#7
|
||||
|
||||
pics
Anyone have pics of their shorter levers mounted?
Stoby |
#8
|
||||
|
||||
I have the Magura 2 one from MidWest on my 2012
And the shorty Zeta on my front Brake
__________________
2012 - XC 300 Racing Seattle, WA |
#9
|
|||
|
|||
Waddya mean "magura 2"? Do you mean the 2nd lever in the picture i posted? Please be very specific!
|
#10
|
||||
|
||||
In your pic the Magura 2 clutch lever. I have that on my 2012
Sent from my HTC VLE_U using Tapatalk
__________________
2012 - XC 300 Racing Seattle, WA |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Handguards Enduro Engineering | mikjoh | Enduro Chassis & Body | 1 | 03-31-2012 08:41 PM |
Looking for the rear brake lever replacement and Gear Lever?? | Scar13 | Enduro Chassis & Body | 11 | 03-12-2012 03:15 PM |
Enduro engineering suspension for gas gas | ScottyR | Enduro Suspension | 16 | 12-16-2010 10:30 AM |
Gas Gas Products by Enduro Engineering | Rod Overstreet | General Discussions & Announcements | 8 | 12-01-2010 04:10 PM |