|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2001 EC250 Jetting
Okay fellas. I just bought a 2001 EC250 and it runs like garbage. Here is my setup:
Currently running 50:1 91 Octane pump gas at sea level an 75* F. 172 Main 38 Pilot #7 Slide N1ED Needle A/S 2 1/2 out Bike runs like garbage off the start. Doesn't want to come up on the pipe at all in first gear. Quick shifts through the gears it runs pretty good, but off idle and off the line WOT it is running really rich. Fouled a plug this morning and started investigating. The clip was on the middle position and the plug was black and wet. I moved it up one notch and it seems to have helped with the mid range ridability, but is still running bad down off the line WOT. I am thinking this is a needle issue. Any recommendations.
__________________
_______________________ 2001 GG EC250 2000 Ducati 996 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
o3 ec250 jetting | dank | Enduro Intake/Carburetion - 2 stroke | 10 | 03-31-2010 01:17 PM |
2010 EC250 Jetting | WTEC | Enduro Intake/Carburetion - 2 stroke | 1 | 03-26-2010 09:41 AM |
2001 EC300 won't idle - can't get jetting right | bexi | Enduro Intake/Carburetion - 2 stroke | 16 | 03-04-2010 10:30 PM |
2001 Ec 300 Jetting 3500-7000' 200lbs rider | wavemanz | Enduro Intake/Carburetion - 2 stroke | 8 | 11-28-2008 10:44 AM |
Arizona: Jetting an '05 EC250 for 7K | AZRickD | Enduro Intake/Carburetion - 2 stroke | 13 | 08-18-2008 08:48 PM |