|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Chain and Sprockets
I am going through my bike after a long summer break and I am behind on getting it put back togther. I needed to replace my entire drive system, after much thought and I decided to go back with aluminum rear sprocket after much debate within myself. I know that many of you guys like and use the Dirt Works Ironman drive systems, so I choose another route. My last set of sprockets were trashed. I had used AFAM rear with great results, much better over using the PBI which is what I am replacing now.
I ordered a kit, AFAM Workslite rear in a 51 tooth and the AFAM counter shaft 13 tooth and for the chain I went with the RK 520 XSO 120 links /with clip style masterlink. I ordered everything from http://www.sprocketcenter.com/ for a very good price. Rear Sprocket PN# 15206+51 for tooth size Counter Shaft PN# 94313A+13N for tooth size. The PN#15206 fits the following bikes: Beta: 400/450/525 (2005-2006) Sherco 450/510 (2004-2007) Suzuki DR 350 SE (1994-1995) DR 350 S (1990-1993) DR 250 S (1990-1992) Husky all through (1999-2006)125, 250, 360, 450, 510, 570, 610
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#2
|
|||
|
|||
Chain & Sprocket Kit Gas-gas
Hello
I am from Greece and I have a GAS GAS 250 2008 model enduro and I want to change the front and rear sprocket and chain. I want to know how many links should have the chain, and where to order so to come to Greece? Thanks |
#3
|
||||
|
||||
As for parts in Greece??? I have no idea. The amount of links will depend on your sprocket combo. I know 13/51 works out to 116 links.
Good Luck
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#4
|
|||
|
|||
Thanks!!!!!!!!
|
#5
|
|||
|
|||
I have found that it is best to buy a 120 link chain, size it up on your bike with your rear wheel at back the distance you want it and the slack you need, then to cut off / remove your excess links.
This avoids the costly and time consuming mistake of buying a chain that is too short. I'm confident that any of the big U.K. accessories dealers will be able to send to Greece eg. http://www.racespec.co.uk/acatalog/index.html ps. a rivet remover tool is quite cheap to buy
__________________
2003 Gas Gas ec300 2007 Ktm 525 exc |
#6
|
|||
|
|||
I have a concern that the Sprockets wearing the ktm is the same as GAS GAS; This is because the shops are almost all ktm but not for gas gas
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Talon Sprockets 12-13-14 | cal_tony | Enduro Product Announcements | 3 | 01-08-2009 06:24 PM |
What other brand sprockets fit? | socalscott | Enduro Chassis & Body | 6 | 12-03-2008 11:48 PM |
chain slider / chain guide crossover? | bondo | General Discussions & Announcements | 1 | 09-01-2008 09:13 PM |
Sprockets | Motarded1 | Enduro Chassis & Body | 17 | 05-25-2008 11:52 PM |
sprockets and chain | quadinfamily | Other GasGas Bikes/Quads | 1 | 04-06-2007 08:52 PM |