GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #11  
Old 07-21-2010, 10:43 AM
dank's Avatar
dank dank is offline
Senior Member
 
Join Date: Nov 2009
Location: Pelican rapids, MN
Posts: 568
Default

+1 on the phone call. i called him about some suspension stuff a while back, called three or four times, and he was always available and willing to talk. definitely worth your time, even if the call is expensive.


__________________
03 ec250
hyde skidplate, cycra handguads, protaper contours
"what? it seemed like a good idea at the time!"
Reply With Quote


  #12  
Old 06-27-2018, 04:34 AM
Novice Novice is offline
Member
 
Join Date: Jun 2018
Posts: 1
Default

Quote:
Originally Posted by chucky View Post
I have read evrything regarding jetting on this forum , the problem is I live in South Africa and have limited access to the different needles described in this forum . The local Gas Gas agents recomend and use a needle that canbe purchased from KTM agents - N3EH , however I dont think this needle works well in the 200 , but I might be wrong that is why I am posting to get advice !!
I have also tried a N3CG needle which is a little better but still not perfect , I know that it is richer on the straight portion and half a clip richer on the taper . I think these needles are too lean on the 1/4 to 3/4 throttle range , also when I do a plug check it is black and wet ( this confuses me even further .
Hi Chucky (or anyone who can assist) sorry to rehash this old thread but I just got a 2007 Ec200 for the mrs, she idles ok-ish but the revs drop after 10 seconds and then she fails to idle at all, there is a constant bog in low (0 to quarter) throttle position. from there on she wakes up and sings quite nicely, all be it hellishly thirsty on juice (6ltrs per 50kms).

currently on:
N3EH #3
175 main 42 pilot
1.5 turns out on AS
slide #7
plug is black and wet (fouling plug every 3rd ride)

I`m keen to find out your best setting as I too reside in South Africa and the real life experience could help me sort out the bike as this is the first 2T (and only carb) bike in the family I`m a little out of my depths.
__________________
2007 GasGas EC200
2005 Honda CRF 230
2012 KTM 350 EXC-F
Reply With Quote
  #13  
Old 06-27-2018, 04:49 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 1,316
Default

For a start do the float level, search on this site. As1 carb if black screw cap carb top.
Then pull out the pilot jet and blow through it until you can see daylight. Smallest is easy to blog if left to sit with premix.

Plugs should last a year.
__________________
'07 EC300
496 CPI Cheetah RZ/RGV hybrid
675 Street Triple R
RS125 framed MB100 racer
Stinger T125 Suzuki
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
what about this jetting? Gasgasogeros Enduro Intake/Carburetion - 2 stroke 3 12-11-2009 08:28 AM
Need help jetting an 06 EC 250 piperpilot12w Enduro Intake/Carburetion - 2 stroke 3 11-16-2008 11:19 PM
Harvest Classic 2007 European & Vintage Motorcycle Rally October 19 & 20, 2007 sanderjavant Republic of Texas 1 09-26-2007 05:18 PM
jetting help for 05 300 please... mackmack Enduro Intake/Carburetion - 2 stroke 5 09-03-2007 05:10 PM
06 300 jetting fury1 Enduro Intake/Carburetion - 2 stroke 1 07-31-2007 06:37 AM




All times are GMT -5. The time now is 05:51 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org