Gasgas ec300 -08 Trying install trail tech

[Fleetch]

Im trying to install this computer thing to my GasGas ec300 -08. Does anyone know which connection that is for the power (the connection with the green/black wires is for the speed sensor)?

All electric and wires was in a plastic bag when I bought my bike and the wire harness was missing! If anyone have one for no use, please let me know!

[Fleetch]

Anyone who knows?

[GGRider01]

I can't find its mate. I would just buy a pair of male/female 6 pin molex connectors and replace it.

[Fleetch]

Thanks for your reply but do not understand what you mean..I need to know if the red/blue or the white/brown wires is for the power?

[john r b]

Contact Trailtech directly.. Good people over their.

[slocalspode]

That is not a trailtech, it is made by Acewell.
The main power, turn signal, high/low beam indicator
is sent through the 6 pin large connector.
The small JSP 2 pin connectors are for the speedo, (green - black)
RPM sensor is the single yellow wire.
The brown - black wire is the power for the internal clock.
The blue - red wire , is???? I forget at the moment, but will come to me...?

Try searching through here:
http://www.acewell.co.uk/User%20Manuals/index.htm

Possibly this one:
http://www.acewell.co.uk/manuals/ACE-3853-A-Wiring.pdf

Good luck, JJ

[Fleetch]

Ok thanks!!