EC250 Wiring

[tholt2]

I have a 19 EC250 that I used to run with a 24v starter set up.

I'm reverting back to using a single battery but I'm no longer hearing the audible "click" on the starter relay when using the wiring below.

Please can I check the wiring as the starter relay and starter motor are new.

+ive of battery to one terminal on starter relay
Other terminal on starter relay to +ive on starter motor

-ive of battery to ground

Is that correct?

thanks

[SS109]

Sounds correct to me. Just make sure if the negative of the battery goes to ground that the starter body is grounded as well.

[tholt2]

Yes it is. Must be the handlebar switch. What's the easiest way of testing that?

[SS109]

Originally Posted by tholt2

Yes it is. Must be the handlebar switch. What's the easiest way of testing that?

I would just do a continuity test. Take the two wires going to the switch, attach your multimeter to them, and test to see if you have continuity when pushing the button.