Gas gas ec 300 cooling fan

[Gassercc250]

Anyone fitted one? If so what's my options? Thanks.

[Moto7man]

There is a thread somewhere on this.

[swazi_matt]

I fitted a GG trials fan to mine with a manually operated switch, but I believe GG now sells an ec kit

[shang]

I did this fan.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

It's the same one trail tech uses for their kits. I also ordered the temp sensor and temp controller from trail tech.

Here's a pic



I had to make a bracket to mount the controller. It might be easier to just buy a KTM kit and modify it to fit. But I guess if GasGas has a kit that would be the easiest route. I couldn't find anything a few years ago when I was looking at doing mine.

[Gassercc250]

Thanks for the replies! Have you more details or pics on how you mounted the fan mate? Thanks

[shang]

Originally Posted by Gassercc250

Thanks for the replies! Have you more details or pics on how you mounted the fan mate? Thanks

I just used rubber washers between the fan and the radiator. Then I slid zip ties through the fins. Then on the other side used another rubber washer backed by a steel washer, then cut the head off another zip tie and zipped it on the end to hold it all together.

Similar idea to this.

http://www.amazon.com/gp/aw/d/B000CJ...2BL&ref=plSrch

[Moto7man]

Originally Posted by shang

I did this fan.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

It's the same one trail tech uses for their kits. I also ordered the temp sensor and temp controller from trail tech.

Here's a pic



I had to make a bracket to mount the controller. It might be easier to just buy a KTM kit and modify it to fit. But I guess if GasGas has a kit that would be the easiest route. I couldn't find anything a few years ago when I was looking at doing mine.

Where did you get your controller? Do you have a link?

[john r b]

Trail tech has a universal kit for 160?

[Martin-EC300]

I'm not clever enough to mount a fan so cheated using a heat sink