#11
|
||||
|
||||
Another quick note. Having a head mod done to clean up the squish works wonders on smaller cc bikes. I did it on 2 KDX's and on my current KTM 200. It cleans things up to run super crisp and clean. Ron Black (RB Designs) is local for us and does awesome work! Just something to consider. Pretty cheap too.
|
#12
|
||||
|
||||
Quote:
I have 4 hours (one ride) on my 2013 250R. Heads due back from TSP any day now. By far the best bang for buck mod on ANY 2T. Easier to jet, less variation in jetting/more stable, improved power, and improved economy. If it makes the bike too angy just gear her up to tame her down. |
#13
|
||||
|
||||
Guys...some follow-up questions on the needles.
Which needles should I look into purchasing for my 200? Is the NOZH a good needle to test with? I see some people talking about the CCL (or maybe it was CCR - not the band ) - one of these? Any other "good" needles to get that work well with a #7 slide? Russ (or Jakobi) - about the head mod...what exactly is done with that modification? And more importantly, what's the typical cost? Any longevity issues when doing something like that? |
#14
|
||||
|
||||
Quote:
A decent engine builder will reduce the squish clearance (piston to head clearance), match the angle of the squish band to the dome, and then correct the volume to set the compression ratio to suit your fuels (or engine characteristics). Its basically just a blue print which will improve efficiency. No negative effects on engine life. |
#15
|
|||
|
|||
i'm at this setting :
MJ 180 (may try 178 for more rev) PJ 40 needle CCL 3rd notch from top no head mods done, idles more or less ok. i did notice i have slide no 6 !? but this setting's real good to me. oh, and mine's a 2001 ec 200 (AS1?) ciao, Hannes. |
#16
|
||||
|
||||
Hey Brad. Gave you the link to Ron Black. The haed mod cleans up the squish and like Jacobi said it is the best bang for your buck when it comes to 2-strokes, especially smaller cc bikes that can be more sensitive to jetting.
Jacobi's description is spot on. I would use these 2 words: linear and crisp. It makes the power delivery linear and makes things nice and crisps throughout. I just had mine done on my KTM 200 and it is so worth it! You'll never have to play with your jetting again. Ron does awesome work, is local and has very quick turnaround. http://www.rb-designs.com/gasgas-head-mod.htm |
#17
|
|||
|
|||
Quote:
|
#18
|
||||
|
||||
Quote:
Its not cheap, especially when comparing to what you can get them done for in the states. He does a thorough job though and takes the time to work out what you're trying to achieve before he gets stuck into the job. In my case with my last head I just asked him to set it to certain tolerances and compression ratios and he made it happen. |
#19
|
||||
|
||||
Quote:
So, stupid question - what do I have to take apart to give to him? Sorry for the ignorance, but this is beyond anything I've messed with previously. I see that he's just over the hill from me in Sherwood, that's frickin' awesome. Back on the needle note, can someone recommend a leaner needle than what I'm currently running? Is the CCL needle hannesd mentioned leaner? How about that NOZH needle - is that leaner? I'm thinking that trying a leaner pilot and slightly leaner needle will help clear the spooge and get my plug in the right ballpark. Of course, all that might be moot with the head mod? |
#20
|
|||
|
|||
Back on the needle note, can someone recommend a leaner needle than what I'm currently running? Is the CCL needle hannesd mentioned leaner? How about that NOZH needle - is that leaner?
i've looked things up, before the CCL ,i came from NOZG just to give you the info i had. that was def richer then the CCL good luck and have fun riding soon again :-) Hannes. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Uk Jetting | Packman | Enduro Intake/Carburetion - 2 stroke | 1 | 07-26-2013 04:28 PM |
How do you know you got your jetting right ? | Krisden | Enduro Intake/Carburetion - 2 stroke | 21 | 07-01-2012 03:49 PM |
GG jetting | Gasgasogeros | Enduro Intake/Carburetion - 2 stroke | 0 | 02-21-2011 06:39 AM |
jetting | macho comacho | Enduro Intake/Carburetion - 2 stroke | 21 | 03-10-2009 03:11 AM |
2005 EC200 jetting help | fury1 | Enduro Intake/Carburetion - 2 stroke | 17 | 12-20-2008 01:55 AM |