Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-08-2021, 08:40 PM
brads1725 brads1725 is offline
Member
 
Join Date: Aug 2020
Posts: 25
Default Gear Lever Cross Over

Hey all,
The spline on my gear shifter is flogged out, does anyone know if they cross to a Yamaha or anything? I'd like to grab something locally if I can, seen a few anodized ones that look good in shops but didn't have my shifter in hand to compare.

BTW, after reading around on the forum about carbs etc I ordered a N3EG to replace my N1EH. The difference is unreal, so clean and crisp, no rich bogging coming out of tight woods and onto a straight. Tail pipe is clean as, no more spooge. Starts first kick hot or cold. Don't know what market this bike was meant for when it left Spain, but I have dropped the 188 main down to a 175, replaced that needle and it's a new machine.
Cheers for the resource!


Reply With Quote


  #2  
Old 02-08-2021, 09:10 PM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

A TM 2 stroke lever is the same, not that that is any easier to get! Plenty of aftermarket companies make them though. Re the needle, the gassers are amazing when jetted properly!
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #3  
Old 02-09-2021, 02:16 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Good to hear re needle btw where did you source it, just today I suggested one but I cant remember where I'd got mine and if they were a YZ or ktm option.

Gear lever are not like anything Japanese. Keep tight and there's a circlip to hold it on else out can fall off. Trust me that's vexing.

Aftermarket does supply. If desperate till then, clamp the spilt end in the vice and run a hacksaw cut down the split so it doesn't bottom out.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #4  
Old 02-09-2021, 07:43 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

The Emgo shifter levers work well on the older GG bikes.

https://www.ebay.com/itm/Emgo-Steel-...4AAOSwe6xbI~yE
Reply With Quote
  #5  
Old 02-09-2021, 09:38 AM
blitz11's Avatar
blitz11 blitz11 is offline
Silver Level Site Supporter
 
Join Date: Oct 2006
Location: SW Montana
Posts: 702
Default

AS 3 also makes a replacement shift lever. it's aluminum, black and red anodized. Hammerhead designs used to make them for GG, but quit, which was very disappointing.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted!! Ec200 seat, radiators, switch gear, gear lever Kendog "Wanted to Buy" & "Want To Trade" 2 10-12-2014 03:12 PM
2013 lever cross over? rubber Jonny General Discussions & Announcements 4 03-18-2014 05:46 AM
Gear lever cross over -> EC 300 ? Grogg88 Enduro Chassis & Body 1 07-01-2012 07:42 AM
Looking for the rear brake lever replacement and Gear Lever?? Scar13 Enduro Chassis & Body 11 03-12-2012 03:15 PM
Clutch and brake lever cross over? colinmc400 Enduro Chassis & Body 8 07-30-2007 12:55 PM




All times are GMT -5. The time now is 12:06 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org