GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 12-05-2017, 10:05 PM
Cox76y Cox76y is offline
Senior Member
 
Join Date: Oct 2012
Posts: 200
Default Information for clutch please

Hi forum members. I am sure with the vast amount of knowledge of members on this forum that someone can give me the information I am after. It is not about a gasgas as such bike but just a general question about clutches. I am about to put a new clutch in my brothers kids honda crf 150r. It has had very little use and the clutch is absolutely stuffed so I am not all that keen of going down the line of putting another OEM clutch in it. Reading on the web it seems as though clutch wear is an issue.
Looking on ebay, I cannot see anywhere selling a clutch that is advertised as being heavier duty than OEM There are clutches from WISECO which are dearer but may be worth the extra dollars if they last. Also may be an option to get one with carbon fibre plates and also others with stiffer springs that would make the clutch engagement more definite.
Anyway, I am hoping that someone could inform me on which way to go with these or if they can point me in the direction of a heavy duty clutch for a crf150r as my knowledge of what makes a good clutch is very limited. I dont think the clutch has changed much since around 2007, I think his is around the 2014 model.
Thanks to members in advance who might be able to contribute.

regards
JC


Reply With Quote


Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Information on House of Horsepower websoul General Discussions & Announcements 6 11-17-2016 02:44 AM
Looking for information to split case RayGas Enduro Engine - 2 stroke 2 05-26-2008 08:15 PM
Information please NewB GasGas Member Polls 3 10-25-2007 09:36 PM
2007 Model Information jeffd General Discussions & Announcements 8 08-27-2006 01:52 PM
FAQ Information Needed.... webmaster General Discussions & Announcements 0 08-02-2006 11:28 AM




All times are GMT -5. The time now is 01:08 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org