GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-19-2008, 04:54 PM
moff747 moff747 is offline
Member
 
Join Date: Dec 2007
Posts: 38
Default M6 hole under engine?

I noticed when changing my gear oil an M6 threaded hole on the underside of the engine, Anyone know what it is? theres nothing in it just a threaded hole. Is this a breather or should it be plugged?


Reply With Quote


  #2  
Old 03-19-2008, 06:46 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,932
Default

If I'm not mistaken all theGasGas engines have another drain hole that is located towards the front of the motor under the crank area. That is used to drain any thing that might happen to get into main bearing area. That should have a bolt with a copper washer. Other than that an oil drain plug for the tranny. Anything else could just be a tapped hole with threads for mounting the cases to during assy process?
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
  #3  
Old 03-19-2008, 10:48 PM
Treesmacker Treesmacker is offline
Member
 
Join Date: Aug 2006
Location: MN
Posts: 82
Default

on the pre-2005 bike it is a breather hole to the ign. and also a fixture hole for ass'y. Some guy's plug it with a screw.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hole In Cylinder PEB Enduro Engine - 2 stroke 1 09-07-2010 10:19 AM
Ignition drain hole. roostafish Enduro Engine - 2 stroke 3 11-28-2008 08:08 PM
2008 Swing arm threaded hole ? REVERUP Enduro Other... 7 11-21-2008 07:36 PM
07 GG300EC - small hole at btm. of engine? g dirt Enduro Engine - 2 stroke 4 02-26-2008 05:48 AM
Mounting hole locations for Scotts Steering Stabilizer SpeedyManiac General Discussions & Announcements 7 01-23-2007 01:33 PM




All times are GMT -5. The time now is 12:21 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org