|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Rear Rotor Cross Over
240mm (4.5mm thickness) Rear Rotor fits following models:
Gas Gas 125 EC Rear 98-07 125 MC Rear 03-05 200 EC Rear 99-07 200 Hobby Rear 07 250 EC Rear 96-07 250 MC Rear 96-06 300 EC Rear 99-07 300 MC Rear 96-06 400 EC FSE Rear 01-03 400 Pampera Rear 06-07 450 EC FSE Rear 03-06 450 EC FSR Rear 07 Husaberg FE 400 Rear 00-03 FE 400 E Rear 01-03 FS 400 C Rear 01-03 FS 400 E Rear 01-03 FS 450 C Rear 03-05 FS 450 E Rear 03-05 FC 501 (4 Speed)Rear 99-03 FE 501 E Rear 99-04 FE 501 S Rear 99-04 FC 600 (4 Speed)Rear 99-03 FE 600 Rear 99-03 FE 600 E Rear 99-02 FE 650 E Rear 01-05 FS 650 C Rear 01-05 FS 650 E Rear 01-05 KTM 125 EXC Rear 00-07 125 GS Rear 93-97 125 MX Rear 89-91 125 MX Rear 92 125 SX Rear 00-08 125 SX Rear 93-97 144 SX Rear 08 200 EXC Rear 00-08 200 SX Rear 03-07 250 EXC Rear 00-08 250 EXC-F Rear 06-07 250 GS Rear 93-97 250 MX Rear 89-92 250 SX Rear 00-08 250 SX-F Rear 06-07 300 EXC Rear 00-08 300 GS Rear 91-95 300 MX Rear 91-92 300 SX Rear 00-02 300 SX Rear 03-06 350 GS Rear 93- 380 EXC Rear 98-99 380 SX Rear 98-99 400 EXC Rear 94-05 450 EXC Rear 03-07 450 SMR Rear 05-07 450 SX-F Rear 03-07 500 MX Rear 89-91 500 MX Rear 92 500 SX Rear 93-95 505 SX-F Rear 07 520 EXC Rear 00-02 520 SX Rear 00-02 525 EXC Rear 03-07 525 MXC Desert Racing Rear 06-07 525 SMR Rear 05 525 SX Rear 03-06 540 SXC Rear 99-00 560 SMR Rear 06-07 600 GS Rear 93- 600 LC4 Enduro Rear 91-92 600 LC4 MX Rear 90-92 620 Adventure Rear 97 620 Duke Rear 95-98 620 SC Supermoto Rear 00-01 |
#2
|
||||
|
||||
What brand of rear rotor crosses with the GasGas??? You list year and brand...are you talking OEM?
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#3
|
||||
|
||||
According to the Parts fiche I can see, it's the same rotor between 2002-2009. Anyone that can confirm this?
__________________
EC 300 2008 |
#4
|
||||
|
||||
why does it matter. if one rotor fits all these bikes, then all those bikes have the same rotor? i got the listing from a JT braking ad
|
#5
|
|||
|
|||
I want to be sure..
So if I order one of those Ktm rotors, it should fit my '03 Ec 250?? |
#6
|
||||
|
||||
If you ordered one from a shop, take your one in when you go to pick it up, then you can compare and if the mounts dont line up, say its wrong and no use to you.
If you ordered online, im pretty sure that if it fits one model on the list, then the mounts must be the same, so it will fit any other on that list. |
#7
|
|||
|
|||
Update: My 2013 is the same rotor as an 05. Also KTM's are a direct swap.
__________________
Dick Carnes "If ya run, you'll only die tired" 2019 EC 300 2018 GP 300 2013 XC 300 (sold) 2006 DE 300 (buddy has it) |
#8
|
|||
|
|||
anyone know the cross-overs for a 2010 GG ec300? Mine are quacking at me, may be the new pads i just put on (possibly may have spillt some brake fluid on them) so may change those out first (or just have a go at them with a wire brush wheel??)
any advice welcome
__________________
2003 txt250 Pro 2013 Ossa 280i |
#9
|
||||
|
||||
OEM Galfer rotors are competitively priced against after market options here in Australia. But ebay china cheapers are out there too.
|
#10
|
||||
|
||||
FWIW, on my '01 XC 200 , a '01 KTM 200 rear rotor was a exact crossover.
RB |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front Rotor Cross Over | alexpp | Enduro Chassis & Body | 1 | 05-15-2010 07:31 AM |