|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Linkage issues?
Hi lads, so i done the linkage and swing arm bearings on my 00 ec200, everything went smooth but as soon as i sat on the bike i noticed there was something wrong, the first 2-3inches of travel feels normal but then it just stop as if there's something jammed in the linkage, i cant see anything wrong and nothing seems to be touching! anybody have any ideas? im stumped!
__________________
if in doubt, flat out! |
#2
|
||||
|
||||
Start undoing bolts again and going through the pivot points. I'm guessing on one the washer/spacer will have slightly fallen off the bushing and will be binding as it rotates through. Undo one at a time and test if the rest moves through its range of motion. You should be able to isolate the culpret in no time.
|
#3
|
|||
|
|||
Thanks for the info! Worked a treat, just an out of place pushing
__________________
if in doubt, flat out! |
#4
|
|||
|
|||
Bushing* -_-
__________________
if in doubt, flat out! |
#5
|
||||
|
||||
Cheers
|
Tags |
suspension linkage |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
02 450 FSE issues | wakeymatt | Enduro Engine 4 stroke (including EFI & Exhaust) | 12 | 08-20-2012 02:33 PM |
2003 FSE 450 issues... | JBPT | Enduro Engine 4 stroke (including EFI & Exhaust) | 6 | 01-24-2011 10:47 AM |
Linkage | redrider7202 | General Discussions & Announcements | 12 | 05-18-2010 09:05 PM |
Linkage | redrider7202 | Enduro Suspension | 1 | 05-12-2010 05:34 AM |