What did you do to your Gas Gas today?

[RBrider]

Originally Posted by hadfield4wd

I did 2 of my pipes recently. Do you have pictures of your setup? I wasn't real happy with mine but it worked. I just used a rubber plug in one end held on with safety wire. And the other was a a rubber pipe cap with a shrader valve and washers to keep it from distorting. 25psi. I used Mapp gas but I've got real torches just didn't want to heat too fast.

No, I don't. Sorry about that. I was using a friends propane torch which was taking too long, so I decided to wait till I had access to my oxy-acetylene torch. Meanwhile I found the new pipe shown in my post.

RB

[EC250]

Fitted my new Raptor pegs today, couldn't be happier with them.

[bowhunter007]

I pulled the old girl out into the light. Even with old a$$ gas, she fired up on kick number 6. After warming her up, I let her sing for the neighbors I removed all the body work and am moving ahead with a thorough "checkup". Might even swap out the 2k2 for my spare 2k3, for more stator output. This bike would be my '01 SE300. I have an '03 EC250, but the '01 has sat in a corner for way too long. The '03 is due for another piston(or more). The YZ needs suspension work.The '01 needs some love...and getting it now

[stian]

I messed up my 300` right side crank-oil seal machined edge, from an advice from a veteran and without using my bloody brain, if Ive ever had one.

[Rod Overstreet]

Quick way to shed poundage! The box that the battery came in, weighs more than the battery itself.

FYI...the stock battery weighs 4lb, 10 oz.

The WPS Featherweight replacement battery...1lb, 2 oz


[IMG][/IMG]

[shang]

Originally Posted by Rod Overstreet

Quick way to shed poundage! The box that the battery came in, weighs more than the battery itself.


[IMG][/IMG]

Rod, what is the foam for? Did you delete the under fender?

[john r b]

isolating mud/water.

[Rod Overstreet]

Originally Posted by john r b

isolating mud/water.

Good man

[shang]

Originally Posted by Rod Overstreet

Good man

I see. Ive removed my under fender and have foam in the same spot. But I don't think I had much of problem before that. But I live in Utah where it's not very muddy. That's a good idea though. Thanks!

[Anders]

Today I spent 3 hours with children and grandchildren and a lot of friends at a frozen lake where the mx club from the neighbor city invited to weekend practice on the ice. About 20 bikes (my son and myself on GG 200). All in all a very fun and lovely way to spend a saturday. I must say; the more I ride the 15 200, the better I like its chassis. As I see it, its a good step forward from the 06.

Sent fra min GT-I9295 via Tapatalk