Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-09-2012, 01:05 AM
davedunaway's Avatar
davedunaway davedunaway is offline
Gold Level Site Supporter
 
Join Date: Jan 2011
Location: williams lake b.c.
Posts: 86
Unhappy 06-300 not running

My 300 is sick. It fires up runs for a bit than dies. Pulled the plug and checked for spark - none. Waited five minutes checked again have spark now put plug back in and it starts only to die again in a couple minutes. This same routine went on 3 or4 times. About two weeks ago I tore the little black box off the coil. Parts finder calls it a regulator/ alternator. I kept riding the last two weeks without it even did a race and it ran fine. Could I have fried the coil I assumed the little box was just for lighting. Any ideas?
Dave
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2006 ec 300 not running as it should eviljim Enduro Engine - 2 stroke 8 08-06-2012 10:18 AM
running out of fuel? cchracer77 Enduro Intake/Carburetion - 2 stroke 30 03-04-2012 10:20 PM
03 300 not running tophat General Discussions & Announcements 22 08-23-2011 03:51 AM
Running hot Brian VT Enduro Engine - 2 stroke 9 10-01-2008 07:25 AM
Running In Dingo Enduro Engine - 2 stroke 3 07-26-2007 11:36 PM




All times are GMT -5. The time now is 07:12 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org