Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 05-12-2013, 03:21 PM
Novascotiarider Novascotiarider is offline
Member
 
Join Date: Dec 2012
Posts: 30
Default

'12 ec250e with ASII 38mm. I have been playing with a JD jet kit.
10-20C degrees
Sea level - 1000ft.
40p
180M
JD red 1 down from center.
A/S 1.5-1.75 turns out
Just changed from a 45p and JD blue, 1 down from center. Was too rich before and was fouling plugs with a bad bog past half throttle. New setup is better but I think I have to go leaner with my Main as I still have a bog when hard on the gas...Works great in the tight stuff. Bog is only evident on open trail or when on the street when I get a chance to open it up.
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
The jetting database needs your help! MattR General Discussions & Announcements 4 10-18-2017 05:34 PM
JD Jetting settings for linear power delivery? SpeedyManiac Enduro Intake/Carburetion - 2 stroke 5 04-06-2010 06:17 PM
Modification/Aftermarket Database SpeedyManiac Enduro Product Reviews 4 02-04-2009 07:09 AM
Jetting Database Announcement MattR General Discussions & Announcements 0 12-18-2008 08:58 PM
Jetting Database Summary MattR Enduro Intake/Carburetion - 2 stroke 0 12-18-2008 08:36 PM




All times are GMT -5. The time now is 07:51 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org