|
Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Metal Chips on oil plug
Just did an oil change (every 5 hours) on my 2011 200ec 6 day and I had some metal chips/slivers on the magnet. Not the fine shavings, but slivers about .3mm x 5 mm. Never had any problems with this before. I know I shouldn't have but I tested it and went on a ride (I was kinda pissed and didnt care if I blew it up). No glitches on the ride, perfectly normal. No missed or rough shifts. No problem getting in gear. No weird sounds (except the Rekluse grind if I slipped the clutch too fast). Anyone else ever experience this...I guess the first step is to pop the clutch cover and see what I can see. Could this be from the clutch? Thanks in advance for any advice.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Metal clutch cover | PFD023 | Parts | 3 | 10-30-2017 07:54 PM |
Metal shavings. What's normal? | fastisbetter | Enduro Engine 4 stroke (including EFI & Exhaust) | 0 | 07-16-2016 09:29 AM |
Metal on metal sound when O-rings from exhaust wear out. | Scar13 | Enduro Engine - 2 stroke | 13 | 02-02-2013 08:19 PM |
Metal shavings in oil | mikemoto | General Discussions & Announcements | 4 | 08-28-2011 10:51 PM |
Mothers Metal Polish | Boomhauer | Enduro Product Reviews | 3 | 06-23-2007 07:02 AM |