Clutch / Brake Banjo Bolts

[iancp5]

Does anyone know what thread size GasGas or AJP use on the banjo bolts? Trying to avoid the mess and hassle of taking one off and on again to measure.

[kendunn]

Funny you should ask that, I was just looking at a spoke for my 06 and noticed they gave the thread size on gofasters for the banjo bolts. It listed the rear as a 10 with a 1.25 pitch. I am sure you could measure the length without taking out.

[iancp5]

Originally Posted by kendunn

Funny you should ask that, I was just looking at a spoke for my 06 and noticed they gave the thread size on gofasters for the banjo bolts. It listed the rear as a 10 with a 1.25 pitch. I am sure you could measure the length without taking out.

Aha that's the answer! I wanted to know diameter (which I suspected was M10) and most importantly pitch. Didn't want the hassle of hydraulic fluid everywhere until I had the new parts. As I am using a Rekluse I plan on linking foot brake to a left hand lever brake by using a dual banjo brake light switch. Now I just need to work out what length hoses I require.

Thanks.