|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ohlins RXF 48 Front Fork
Has anyone tried to match up the new OhlinsRXF fork to a GG yet?? I believe there are several issues to work through since Ohlins don't make a set. For example triple clamp size front tire and the brake caliper alignment
__________________
2011 Nambotin 2010 300 Six Days 2008 Raga 2008 250 xc KTM 2007 200 xc KTM To many KTM's to list 1983 175 IT Yamaha 1995 200 KDX Kawasaki |
#2
|
|||
|
|||
Ohlins Fork
The current forks are 48mm zokes that I want to replace. I read the thread about the showa will I be in the same boat having to machine clamps and spacers?
__________________
2011 Nambotin 2010 300 Six Days 2008 Raga 2008 250 xc KTM 2007 200 xc KTM To many KTM's to list 1983 175 IT Yamaha 1995 200 KDX Kawasaki |
#3
|
||||
|
||||
Quote:
If the RXF48 fork is similar dimensionally around the clamping surface to the 48mm zoke you may get away with just finding a wheel that will fit. |
#4
|
|||
|
|||
decisions
I can pick up a set of ttx cartridges Monday or a set of rxf forks. I had the ttx's in a set of sachs that Ohlins USA valved and sprung and they were great. I sold the bike to a friend and picked up a nambo. Just miss plush suspension sticks like velocro in the single track woods
__________________
2011 Nambotin 2010 300 Six Days 2008 Raga 2008 250 xc KTM 2007 200 xc KTM To many KTM's to list 1983 175 IT Yamaha 1995 200 KDX Kawasaki |
#5
|
||||
|
||||
Quote:
Is there any advantage to having the RXF fork over the zokes with ttx22 cartridges, apart from the bling factor? Reading on the ohlins site it sounds like the RXF is just an ohlins packaged ttx22 fork. Surely the fork costs more than the cartridge, and may not work with the gasgas wheel and brake assy. |
#6
|
||||
|
||||
I thought the Nambo had TTX?
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#7
|
||||
|
||||
Why not just valve what you have?
|
#8
|
|||
|
|||
zokes
They are harsh over trail garbage. I 've had them revolved and sprung. Nothing negative toward the tuner. The clickers are very vague doesn't really matter how much you adjust them. Besides that the rebound is way to fast. I have had the ttx's in the past there incredible. Its more than that as well. By the time I get them off to the tuner and back its been two weeks. Ohlins is an hour away. More of convenience too
__________________
2011 Nambotin 2010 300 Six Days 2008 Raga 2008 250 xc KTM 2007 200 xc KTM To many KTM's to list 1983 175 IT Yamaha 1995 200 KDX Kawasaki |
#9
|
|||
|
|||
ummm jealous!
|
#10
|
|||
|
|||
How about a ride report!
__________________
2018 XC300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
01 200 Ohlins fork seal ? | kendunn | Enduro Suspension | 2 | 10-08-2011 03:37 PM |
Ohlins fork bleeders. | Porkyblader | United Kingdom | 0 | 11-07-2010 12:31 PM |
Ohlins Fork ? | PEB | Enduro Suspension | 0 | 10-06-2006 04:45 PM |