Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-30-2014, 05:24 PM
Mark Berg - CPD's Avatar
Mark Berg - CPD Mark Berg - CPD is offline
Site Sponsor
 
Join Date: Aug 2006
Location: All over Minnesota
Posts: 390
Default 2014 EC300 Model and changes

Opened up the crate last week on our 2014 and started to write the list of changes over the last couple of years to the bike! I am sure the thread was started before, but here is a refresher! GasGas has had some struggles in 2012, the 13 bike was an improvement, and the 14 hits it!

Some key things over the competition for the same price if not lower?.(i am sure i missed a few)

AXP Skid plate comes stock
FMF Stealth spark arrestor
48mm marzocchi forks
Reiger shock (this is a very nice shock with long durability and a solid history)
Polished hubs
Excel Rims
Galfer Wave rotors front n rear
Nissan brakes
New engine cases (lighter, smaller)
New cylinder (consistent performance)
New cylinder head
New water pump housing for better cooling (GasGas has always been a very cool running bike)
Vforce 4 reed system (upgrade from vforce 3)

Many smaller items as well

Bigger oil sight glass
New rear brake pedal with bearing system, works better
Front axle pull
New outer clutch cover (better oil flow)
Side plates have access to exhaust
Double wall handlebar (renthal copy)
New footpeg design with removable brackets
Attached Images
File Type: jpg 14 ec300.jpg (116.9 KB, 242 views)


__________________
Mark Berg
Reply With Quote


  #2  
Old 01-30-2014, 05:35 PM
Coop's Avatar
Coop Coop is offline
Senior Member
 
Join Date: Mar 2013
Location: Acme, Pa
Posts: 480
Default

Very nice.
__________________
-Mike
2009 Beta Evo 300 4T - 1982 Suzuki PE175
Reply With Quote
  #3  
Old 01-30-2014, 06:36 PM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default

Mark, Thank you for posting the photos. Any word about the 200's?
Were can I get one of those GG floor mats?
Reply With Quote
  #4  
Old 01-30-2014, 06:45 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Love the extra hole in the side panel to access the exhaust mounts!

Sounds like a good list of revisions. No doubt the rags will still find something to bag though. Like the pink shock

I'm interested to see/hear what the changes to the head have been. Hopefully they've taken advantage of the improved tolerances in the cylinders and will be shipping with less head to piston angles and a tighter squish band.
Reply With Quote
  #5  
Old 01-30-2014, 08:36 PM
JP4's Avatar
JP4 JP4 is offline
Senior Member
 
Join Date: Nov 2010
Location: Ontario, Canada
Posts: 247
Default

Thanks for the report. Not much 'Real' info on the 2014's as of yet.

Quote:
Originally Posted by Jakobi View Post
Love the extra hole in the side panel to access the exhaust mounts!
Ditto on that! No access = huge PIA for no reason, but what seems like an oversight by the designers. It was the first thing I noticed on the early pics.

Early reports would suggest that the 2014 GGs have turned the corner.

I sure would like to see/hear about the fit and finish of the 14's. As much as I might not like aspects of the orange bikes, they are well put together. What I've seen of the Sherco's and Beta's recently has also been a step above the Gassers in this regard.

I'm due for a new ride in 2015. It will most likely be a GG, but definitely so if the fit and finish matches the Euro competition.
Reply With Quote
  #6  
Old 01-30-2014, 08:39 PM
Beta Steve Beta Steve is offline
Senior Member
 
Join Date: Apr 2009
Location: Maple Valley WA
Posts: 121
Default

That is a sweet looking bike!
Reply With Quote
  #7  
Old 01-30-2014, 10:34 PM
Bandit9's Avatar
Bandit9 Bandit9 is offline
Platinum Level Site Supporter
 
Join Date: May 2007
Location: Lafayette, La.
Posts: 654
Default

They sure know how to make a visually appealing bike. Even with the ugly shock.

This is just torturing me.
__________________
Blanco

Current ride: 2009 WR450

Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F
Reply With Quote
  #8  
Old 01-30-2014, 11:19 PM
redrider's Avatar
redrider redrider is offline
Senior Member
 
Join Date: Oct 2011
Location: Virginia
Posts: 133
Default

Anyone know when/where the first Demos for these bikes will be?
__________________
Walt Kidd
2011 EC 250
2011 NAMBOTIN
2015 Beta 300
2016 Beta 300RE
2016 Beta 350RE
Reply With Quote
  #9  
Old 01-31-2014, 11:17 AM
liv2day's Avatar
liv2day liv2day is offline
Platinum Level Site Supporter
 
Join Date: Nov 2013
Location: Sherwood, Oregon
Posts: 969
Default

In my best Fat Bastard typing voice (lol):

Dead Seeeexy

I'm really hoping to convert my wife to a 2T (she's on a KTM 250 4T right now). I don't want to get banished or flamed, but I think an ideal bike (even for me) is the KTM 250R Freeride, though who knows if we'll ever see it in the states.

That said, I think the seat height, planted feeling, and overall package of my EC200 is the perfect trail bike and I look forward to seeing what's what when it's time to pass this one down.
Reply With Quote
  #10  
Old 02-05-2014, 08:13 AM
apa apa is offline
Member
 
Join Date: Dec 2013
Posts: 12
Default

Are the radiator hoses still the same?
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2014 ec300 photo's Malcolm General Discussions & Announcements 3 07-21-2013 06:25 AM
Which year/model Jap bike uses same '06 EC300 brider Enduro Chassis & Body 6 03-19-2013 05:09 AM
gasgas ec300 05 model wont hit full powerband??!?!?!? jimmyT Enduro Engine - 2 stroke 9 08-30-2011 11:31 PM
ec300 2000 model user manual cjcj121 Enduro Other... 4 10-09-2010 12:54 AM
Carb model on 04 ec300? socalscott Enduro Engine - 2 stroke 4 01-12-2010 06:40 AM




All times are GMT -5. The time now is 11:03 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org