Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-05-2019, 11:46 PM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,542
Default Clutch Basket Bearings

Upon inspection, I noticed a very very slight amount of radial play in my clutch basket, I suppose the two clutch basket bearings need replacement. Does anyone have a crossover bearing that will match up?

I did find this for a txt pro, will it match up? Does anyone know?

https://www.splatshop.co.uk/gasgas-p...e-bearing.html


__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote


  #2  
Old 01-06-2019, 12:02 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,595
Default

I've found that some play is normal.
Reply With Quote
  #3  
Old 01-06-2019, 01:58 PM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,542
Default

Quote:
Originally Posted by gasgasman View Post
I've found that some play is normal.
That is what I thought. I am going to pull the basket out and check the two bearings and the bushing just to be safe. Just so I don?t have a 🤪 clutch basket failure later. Thanks for the input!👍
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #4  
Old 01-06-2019, 08:23 PM
pscook's Avatar
pscook pscook is offline
Platinum Level Site Supporter
 
Join Date: Oct 2011
Location: Shoreline, WA
Posts: 1,164
Default

Quote:
Originally Posted by Moto7man View Post
That is what I thought. I am going to pull the basket out and check the two bearings and the bushing just to be safe. Just so I don?t have a 🤪 clutch basket failure later. Thanks for the input!👍
Remember that the bearings will "swell" when filled with oil, as they ride on a film of oil. Space is needed for the oil to fit between the moving parts.

It's not capillary action, it's something else. I just can't remember the term. But without an oil pump the oil will get pulled through the bearings for lubrication.

It might be capillary action, but I seem to think that there's a better term.
__________________
Phil
(New bike pending...)
Reply With Quote
  #5  
Old 01-06-2019, 09:51 PM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,542
Default

Quote:
Originally Posted by pscook View Post
Remember that the bearings will "swell" when filled with oil, as they ride on a film of oil. Space is needed for the oil to fit between the moving parts.

It's not capillary action, it's something else. I just can't remember the term. But without an oil pump the oil will get pulled through the bearings for lubrication.

It might be capillary action, but I seem to think that there's a better term.
Wow, I never thought about that. I have to pull it apart to replace the plates and update the Rekluse Disc from a Core 2.0 to a Core 3.0(new rings each side and new wedges per the Rekluse rep.) This clutch has held up great, this is the first time that I have had it apart since July 2013,believe it or not.🤪
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2011 ec300 clutch basket bearings CACTUSREID Enduro Engine - 2 stroke 2 07-11-2015 11:18 PM
Auto clutch Install, Rekluse or S3 Clutch Basket? Moto7man General Discussions & Announcements 49 11-24-2013 12:41 AM
New Clutch Basket Rick Enduro Engine - 2 stroke 0 05-22-2011 09:30 PM




All times are GMT -5. The time now is 10:59 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org