Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Old 01-08-2021, 10:31 AM
steliost's Avatar
steliost steliost is offline
Platinum Level Site Supporter
Join Date: May 2012
Location: Northern Greece
Posts: 73

Just checked it and it seems to open and close fully. i pulled the exhaust out and right side PV cover, looked in the port and the flap doesn't protrude with the valve open. good job.
thanks Jim and Zman.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Low down / tickover issue HELP stevehipkiss Enduro Intake/Carburetion - 2 stroke 9 02-14-2011 09:03 AM
jetting - idle issue. stainlesscycle Enduro Intake/Carburetion - 2 stroke 7 12-30-2009 02:47 AM
clutch issue boostedte37 General Discussions & Announcements 2 11-09-2009 06:58 PM
ec 400 gearbox issue Paul Somerville Enduro Engine 4 stroke (including EFI & Exhaust) 3 09-05-2009 10:17 AM
PowerValve Issue- Take A look at this Picture alexpp Enduro Engine - 2 stroke 13 04-12-2009 12:13 AM

All times are GMT -5. The time now is 07:22 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org