Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Old 12-05-2022, 07:51 PM
farmerj's Avatar
farmerj farmerj is offline
Platinum Level Site Supporter
Join Date: Dec 2007
Location: Salem, OR
Posts: 346

Originally Posted by tholt2 View Post
Does the vacuum tube go throught the wiring grommet and do you use some sort of fixing to pass the tube through into the ignition mechanism? Like on the Slavens racing ktm wet mod where he uses a brass fixing?
Most guys here drill a hole on top of the housing and tap it for a fitting, which can then have a hose attached to vent up under the tank.

But I did as you suggest - I used a small plastic fitting that has barbs on each end (in this case, a drip irrigation connector) and pushed one end through the rubber wiring grommet, being careful not to damage any wires. So it can be done without drilling the housing.

You might be able to insert a short piece of metal tubing through the grommet (to which you can add a piece of hose) and accomplish the same thing.



'18 GG XC 300
'05 GG DE 300
'01 GG txt 321
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
2018 Starter Fix Thread - Continued. webmaster Enduro Electrical & Wiring 162 04-26-2023 02:57 AM
EC 300 2018 starter problem eralha Enduro Electrical & Wiring 74 10-08-2020 03:41 PM
Eectric starter 2018?s.. GasgasGP Enduro Electrical & Wiring 86 11-21-2018 10:03 PM
2018 Starter Delete nhgas Enduro Electrical & Wiring 1 11-10-2017 07:58 PM

All times are GMT -5. The time now is 06:30 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org