Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Old 11-09-2022, 04:16 AM
BMG BMG is offline
Join Date: Jul 2022
Location: Wellington, NZ
Posts: 15
Default 2018 XC300 Clutch Piston housing - almost impossible to source


I discovered on the weekend that the previous owner of my bike had used a cheap O ring on the piston in the clutch slave cylinder (the housing that attaches to the engine) and it's scratched to sh*t and next to useless.

No problem I thought, I'll just get a new one with part number ME250632026. Outside of Spain and Italy these are impossible to find on the internet and the ones in Spain/Italy do not ship out side of Spain/EU. I'm in New Zealand but do have friends in the UK that I could post things to.

Anyway - it seems that this part is no longer made? How the hell can that be. The Reiju that it's off is brand new and they no longer make the part? I don't get it.

Super frustrating as now I have bike that might as well be a paper weight.

Does anyone know if any other brands cylinder/housing fits the 2018 GG? From what I have found on the internet its the same part for 2009 through to 2019 (for GG) or 2020 onwards for the Reiju.

Or does anyone have a good website that ships internationally?


Reply With Quote

Old 11-09-2022, 07:05 AM
BrandonEc300 BrandonEc300 is offline
Join Date: May 2020
Location: West Milford NJ
Posts: 18

The part ME250632026 Is available here in the states?https://cpd.direct/pages/oem-parts-diagrams
Reply With Quote
Old 11-09-2022, 01:04 PM
swazi_matt swazi_matt is offline
Senior Member
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,324

Did you try motocrosscenter.com ? I would be surprised if they didn't ship to NZ - may be worth asking via email
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
Old 11-09-2022, 05:02 PM
BMG BMG is offline
Join Date: Jul 2022
Location: Wellington, NZ
Posts: 15

Update: A supplier in the UK managed to find one deep in their inventory. Phew.

From other posts on here it looks like the plunger has been redesigned to have two o rings rather than a single one like I have. I think I'll upgrade to the double to be safe!

Thanks for the replies. I'll make a note of those sites for the future.

I having bad thoughts about selling the GG and getting a KTM so the parts issue is not a constant headache!
Reply With Quote
Old 11-09-2022, 11:28 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,004

Strange, my 07 has 2 orings. I accidentally typed 3, and considered leaving the mistake for larfs. Everyone loves a Topper.
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
seized piston EC 300 2018 eralha Enduro Engine - 2 stroke 9 02-22-2019 08:43 PM
2018 KYB AOS Fork Free Piston Jacob 'Berg Enduro Suspension 5 09-17-2018 04:47 AM
WTB: Clutch Master cylinder. (push rod housing) slocalspode "Wanted to Buy" & "Want To Trade" 5 03-15-2016 12:00 PM
Impossible to remove tail light on 2012? Bandit9 Enduro Chassis & Body 3 09-27-2013 04:51 PM
Remove valve cover - Impossible [450 SFE -05] luzt Enduro Engine 4 stroke (including EFI & Exhaust) 2 02-18-2013 06:52 AM

All times are GMT -5. The time now is 07:04 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org