#1
|
|||
|
|||
front brake crossover
Have run into trouble, need a kit for front brake master cylinder on my GG300 2005. Have been told can't get one need to buy new front brake just over $300. Must be able to get one somewhere. Pulls apart so must be able to get parts? Anyone????
|
#2
|
||||
|
||||
Correct me if I am wrong, but I think they share the same front as a lot of Hondas. The pads crossover at least.
__________________
2004 GasGas DE250 |
#3
|
||||
|
||||
My master cylinders are AJP (2003 model). Lots of places do rebuild kits.
http://www.ajpamerica.com/rebuild-kits-and-parts.html |
#4
|
|||
|
|||
My bike runs nissin brakes not AJP.
|
#5
|
||||
|
||||
Yes most do but check the master cylinders. They may not be the same as the calipers.
|
#6
|
|||
|
|||
I imagine any front brake master could be made to work. I would search ebay for either a 2000 CR or XRR and get the master and the hose, if I could get one on the cheap. May not need the hose, but you could maybe get it cheap.
__________________
2006 EC300, 2000 XR650R, 2003 EC250, 2001 EC200 (OK, the last two are really my sons). |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Brake seal kit crossover? | nick790 | Enduro Chassis & Body | 4 | 04-04-2015 09:15 PM |
Front brake Assy crossover | gtsnowcrack | Enduro Chassis & Body | 1 | 07-24-2012 09:32 AM |
brake disc crossover? | moff747 | Enduro Chassis & Body | 3 | 09-01-2008 02:57 PM |
ec250 '02 brake line crossover | thensome | Enduro Chassis & Body | 2 | 08-17-2008 12:41 PM |
Rear brake line crossover? | ScottyR | General Discussions & Announcements | 2 | 07-04-2007 06:17 AM |