Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-28-2007, 03:14 PM
thingymijig's Avatar
thingymijig thingymijig is offline
Member
 
Join Date: Feb 2007
Location: London UK
Posts: 10
Smile Clip position ?

I ride a 2002 250 EC
Can anyone tell me what the clip position actually does, The manual recommends my set up in the central position. What effect does putting the clip higher or lower have ?

My settings are

Needle N1ef
main jet 178
Pilot 38
slide 6
altitude 300 ft above sea level
Does this set up look ok if not what changes would you make ?

Thanks


__________________
Matty
Reply With Quote


  #2  
Old 02-28-2007, 07:19 PM
Brian VT Brian VT is offline
Senior Member
 
Join Date: Jul 2006
Location: Vermont, USA
Posts: 827
Default

The needle affects fuel flow mostly from approx. 1/8 to 3/4 throttle.
Raising the clip on the needle leans your fuel/air mixture in this throttle range and lowering it richens it.
The needle restricts fuel from being drawn through the needle jet. As the throttle is turned it raises the needle out of the jet, progressively allowing more fuel through.
Reply With Quote
  #3  
Old 03-01-2007, 12:42 AM
thingymijig's Avatar
thingymijig thingymijig is offline
Member
 
Join Date: Feb 2007
Location: London UK
Posts: 10
Default Still rich

Thanks for the reply Brian
so by this i think i shoulld put the clip on the top cut away, as it seems to be missing and spluttering still (too rich ?) even though the jets and needle are quite lean ? and the air screw is out 1 1/2 turns. Would changingh the slide from a 6 to a 7 make much difference ?
Thanks
__________________
Matty
Reply With Quote
  #4  
Old 03-01-2007, 04:57 AM
JTT JTT is offline
Super Moderator
 
Join Date: Jul 2006
Posts: 62
Default

Go one clip position at a time. Try the #2 position if the middle seems rich (positions count from the top slot down).

Yes, a leaner slide will effect a similar opening range. Much like changing needles.

Have a read through this
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Handlebar mounting position bchatt Enduro Chassis & Body 8 10-14-2010 05:34 AM
neddle position Question biggstr6 Enduro Intake/Carburetion - 2 stroke 8 05-12-2010 10:26 AM
Euro Enduro Clip Rick Pictures & Videos 1 12-09-2008 05:55 AM
Throttle position sensor adjustment? bergerhag Enduro Engine 4 stroke (including EFI & Exhaust) 3 05-08-2008 06:46 AM
helmet cam clip fury1 Pictures & Videos 2 11-20-2007 04:42 PM




All times are GMT -5. The time now is 12:43 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org