Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-10-2013, 07:59 AM
nambo-trev's Avatar
nambo-trev nambo-trev is offline
Senior Member
 
Join Date: Jun 2010
Location: alberta
Posts: 1,185
Default Jd red needles for different bikes??

Hey guys does anyone know if the red needle out of say a husaberg kit is the same as the gasgas kits red needle?? I lost my gasgas needle but have a red out of a husaberg kit. I don't know why they would be different as they only have a red dot on them to mark them so how would you even know what kit they came out of right?? Just wanting some input


__________________
trevor
Reply With Quote


  #2  
Old 09-10-2013, 08:11 AM
nknudsen's Avatar
nknudsen nknudsen is offline
Senior Member
 
Join Date: Oct 2012
Location: SE Minnesnowta
Posts: 722
Default

From what I've been told they are the same.
__________________
Noah
2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title
16' Ski-Doo XS Renegade X 1200 4T
16' Specialized Fatboy trail
02' ZRX 1200r R.I.P.
72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been)
15' TW200
Reply With Quote
  #3  
Old 09-10-2013, 08:18 AM
nambo-trev's Avatar
nambo-trev nambo-trev is offline
Senior Member
 
Join Date: Jun 2010
Location: alberta
Posts: 1,185
Default

I kind of figured I just never understood why they have all the different kits if they just come with different paper work but the same needles and jets.
__________________
trevor
Reply With Quote
  #4  
Old 09-10-2013, 09:10 AM
nknudsen's Avatar
nknudsen nknudsen is offline
Senior Member
 
Join Date: Oct 2012
Location: SE Minnesnowta
Posts: 722
Default

I think the kit/jet sizes change some due to bike and carb types.
__________________
Noah
2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title
16' Ski-Doo XS Renegade X 1200 4T
16' Specialized Fatboy trail
02' ZRX 1200r R.I.P.
72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been)
15' TW200
Reply With Quote
  #5  
Old 09-10-2013, 03:44 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Yeah same across the 2T ranges. Different paperwork and additional jets depending on the bike.
Reply With Quote
  #6  
Old 09-10-2013, 07:32 PM
gas-gas 52 gas-gas 52 is offline
Member
 
Join Date: May 2012
Location: Hindman, Ky.
Posts: 33
Default

The needles in the gas gas kit should have four rings on in........I done the same thing and had to call the company and he said they were four different red needles. you could tell them apart by the # of rings below the clip groves
Reply With Quote
  #7  
Old 09-10-2013, 09:53 PM
nambo-trev's Avatar
nambo-trev nambo-trev is offline
Senior Member
 
Join Date: Jun 2010
Location: alberta
Posts: 1,185
Default

That's not true for the 001 kit. My gasgas kit came with a red needle with 5 clip positions and my husaberg kit came with the same 5 clips. Maybe the 11/12 kit is different
__________________
trevor
Reply With Quote
  #8  
Old 09-10-2013, 10:08 PM
gas-gas 52 gas-gas 52 is offline
Member
 
Join Date: May 2012
Location: Hindman, Ky.
Posts: 33
Default

It has nothing to do with the clip position groves....... These are located below the clip groves........they are lightly scored rings. You can feel them with your fingernail .
Reply With Quote
  #9  
Old 09-10-2013, 10:55 PM
nambo-trev's Avatar
nambo-trev nambo-trev is offline
Senior Member
 
Join Date: Jun 2010
Location: alberta
Posts: 1,185
Default Jd red needles for different bikes??

They both have the same amount of rings as well, I know those groves are there and that is precisely why I asked the question initially because the gasgas needle and my husaberg needle are identical. Maybe those too kits just run the same needle if Jd is saying there is different tapers. All good anyway I ran the berg needle in the gasser today and it is responding exactly the same as the gasser red needle
__________________
trevor
Reply With Quote
  #10  
Old 09-11-2013, 04:05 AM
n_green n_green is offline
Senior Member
 
Join Date: Jun 2012
Location: Sydney, Australia
Posts: 675
Default

I've confirmed the fact from JD himself (or someone working for him using his emails in any case) that the red and blue needles from a KTM/Berg 2T kit are identical to the red and blue needles used in the GG 2T kit.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Difference between LTR needles? SWMS Enduro Intake/Carburetion - 2 stroke 0 06-28-2011 12:41 AM
Buying needles biggstr6 General Discussions & Announcements 0 07-08-2010 08:17 AM
needles? clerky clerk Enduro Engine - 2 stroke 23 10-13-2008 04:06 PM
needles moff747 Enduro Intake/Carburetion - 2 stroke 4 07-09-2008 04:43 PM
Needles skid jackson Enduro Intake/Carburetion - 2 stroke 5 08-17-2007 06:25 PM




All times are GMT -5. The time now is 04:22 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org