Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 01-02-2011, 06:18 PM
Bryan's Avatar
Bryan Bryan is offline
Gold Level Site Supporter
 
Join Date: Jul 2008
Location: Auburn, Washington
Posts: 203
Default '01 300 Suspension rebuild

I delivered my forks and rear shock to Les at LTR last Friday. (he just lives a few miles from me). He is going to build and respring the forks and shock. They have always been a little light for me. Time to get them right.

While it is apart, it is time for complete chassis maintenance. The swing arm bolt was a royal b*tch to get out. The bearings are shot, go an order into Gofasters for their complete pivot bearing and seal set.

Gonna replace a bunch of fasterners and try to more that are the same size while I am at it.

Notice the wiring harness is a chaffed some, so I will have to track down a replacement and figure out what is causing the rub points.

I have had a trail tech computer for a few years, now I will finally mount it up.


__________________
07 EC 300
06 Gold Wing
(2) 06 CRF 150 F
Reply With Quote


  #2  
Old 01-03-2011, 02:48 AM
moto9's Avatar
moto9 moto9 is offline
Silver Level Site Supporter
 
Join Date: Mar 2009
Location: Hawaii
Posts: 367
Default

Quote:
Originally Posted by Bryan View Post
I delivered my forks and rear shock to Les at LTR last Friday. (he just lives a few miles from me). He is going to build and respring the forks and shock. They have always been a little light for me. Time to get them right.

While it is apart, it is time for complete chassis maintenance. The swing arm bolt was a royal b*tch to get out. The bearings are shot, go an order into Gofasters for their complete pivot bearing and seal set.

Gonna replace a bunch of fasterners and try to more that are the same size while I am at it.

Notice the wiring harness is a chaffed some, so I will have to track down a replacement and figure out what is causing the rub points.

I have had a trail tech computer for a few years, now I will finally mount it up.
My ride buddy here from Hawaii is sending his stuff out to Les tomorrow
I know He'll be happy when he gets it back
Reply With Quote
  #3  
Old 01-03-2011, 04:19 PM
Fred1956's Avatar
Fred1956 Fred1956 is offline
Senior Member
 
Join Date: Oct 2009
Location: NW Arkansas
Posts: 1,254
Default

Mine went to Les today, looks like he'll be busy.....
__________________
Fred Overstreet
2010 EC250 SixDays
2004 GasGas EC300 -Sold to a good home
2006 GasGas EC250-Sold to a good home
2006 GasGas TXT 280 Pro
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
125 rebuild chronicle noobi Enduro Engine - 2 stroke 9 06-25-2009 04:12 AM
Need help on top end rebuild rpduc Enduro Engine - 2 stroke 17 03-26-2009 11:05 PM
05 rebuild brains Enduro Suspension 2 07-22-2008 08:54 AM
Rebuild steve Enduro Engine - 2 stroke 8 01-13-2008 03:06 PM
Rebuild 200 Motor ramcclure200 Enduro Engine - 2 stroke 0 05-04-2007 07:10 AM




All times are GMT -5. The time now is 12:41 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org