|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
pipes, early vs. later years
FMF site shows a different part number for the Gnarly pipe 1998-2002 vs 2003-2006.
Does anyone know what the difference is? Is it minor enough that a person can make the older version fit on a '04? I found a good deal on an older version pipe for my kids '04 but am hesitant to buy it. Thanks for any help.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#2
|
||||
|
||||
If it is the pipe that is on E-bay and the auction ends
tonight. We are watching the same item. I have a 99 EC and an 02 EC. I bought an FMF pipe on ebay a couple years ago that was supposed to be for the 03-06. part number 025032. I installed it on the 02 and it did fit with a little extra persuasion. I also installed the FMF from the 02 onto the 99. It fit, but, the lower mount did not line up. So I'd say there is a differrence. My 02 came stock with an FMF pipe. part no. 020118. And that is the same pipe that is for sale on e-bay right now. There is a good chance you can make the older pipe fit the 04. But you may have to force it a little or have to live without being able to use the lower pipe-to-frame mount. Good luck. Jeff So. Cal. |
#3
|
|||
|
|||
Quote:
I didn't say anything about an E-bay item If it was for me I would have already bought it but it's for my kid and I'm done buying his parts when he ruins stuff being stupid. He's up camping with his newly smashed pipe and won't be back in time anyhow. Thanks.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#4
|
||||
|
||||
Pacific Crest Pipe repair can repair it for $60.
FYI. They don't have a Gas Gas jig so you will have to tweek it a bit to fit the bike. www.piperepair.com |
#5
|
|||
|
|||
Quote:
I was up there Saturday and saw it. If they could repair it I don't think I could ever get it close to lining back up again.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#6
|
||||
|
||||
Pacific Crest does a great job. I am still using my stock Messico pipe on my 99 EC200. I have sent in my pipe at least 3 times to them for minor to major repairs, every time it come back perfect. The mounting tabs are numbered when the pipe is returned, and it mounts right up, so they must be using something to true the pipe. $60.00 is alot better than buying a new pipe. Sure I could have replaced the Messico for the money I've spent on pipe repairs, but a the Messico is a conversation starter
They list GASGAS on the ording page.......Give them a try...
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#7
|
||||
|
||||
If it looks anything lie mine I doubt it's repairable.
__________________
2004 GasGas DE250 |
#8
|
||||
|
||||
Josby. If you want the pipe, bid on it. I will hang
loose and let you have it. I was only thinking of picking it up as a spare since it is a pretty good deal. About the same price I payed for the one I have on it now. Which, I think, is the one you really need. Part no. 025032. It ends @ 7:00PM tonight PDT.....oooh. I see there is one bid on it. I hope that is you. Good luck. Jeff |
#9
|
|||
|
|||
slocalspode, he just showed up and wants the new pipe that is made for his model year (wasn't me bidding). Thanks all for your replies.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Newbie inviting riders to Brock Creek Ar on New Years Ride. | jgas | General Discussions & Announcements | 0 | 12-13-2009 12:27 PM |
The Ohlins Years | Jayhawk Ken | Enduro Suspension | 2 | 06-29-2009 08:28 AM |
black pipes | rupecopp | Enduro Engine - 2 stroke | 3 | 10-11-2008 11:20 PM |
pipes | Davezi | Enduro Engine - 2 stroke | 0 | 05-26-2008 10:43 AM |
Pipes and Jetting | Texas Gasser | Enduro Engine - 2 stroke | 5 | 04-23-2008 05:03 PM |