Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-14-2013, 10:40 AM
mconnell mconnell is offline
Member
 
Join Date: Jun 2012
Location: Mustang, OK
Posts: 23
Default Question about a needle marking

When I bought my 300, the PO gave me some extra jets. One of the needles is stamped "N CH". It doesn't appear to have a digit between the N and the C.

Is this one of the famous N3CH needles and the second digit stamp is just missing? Or, is there actually a needle that is N CH?


__________________
Mike
2011 300 Nambotin Replica
2001 Gas Gas 321 Trials bike
2010 BMW F800GS
Reply With Quote


  #2  
Old 08-14-2013, 10:49 AM
djroggen's Avatar
djroggen djroggen is offline
Senior Member
 
Join Date: Aug 2010
Location: Ortonville, MN
Posts: 575
Default

Quote:
Originally Posted by mconnell View Post
When I bought my 300, the PO gave me some extra jets. One of the needles is stamped "N CH". It doesn't appear to have a digit between the N and the C.

Is this one of the famous N3CH needles and the second digit stamp is just missing? Or, is there actually a needle that is N CH?
Not sure but there is a thing such as a NECH and a N3CH (one of the top 3 needles IMO). I would try it, see what you think. The main thing is that if the bike is running well at WOT and at idle but seems to be either hot or cold throughout, then a simple raising or lowering of the needle is all that is necessary.
__________________
2013 GasGas 300
2004 GasGas 200
2011 GasGas 300
Ortonville Minnesota
Reply With Quote
  #3  
Old 08-14-2013, 02:47 PM
mconnell mconnell is offline
Member
 
Join Date: Jun 2012
Location: Mustang, OK
Posts: 23
Default

My bike currently has a JD red needle in it. I just bought the bike last week and I haven't had time to get it out and ride it yet, other than a few passes up and down the street. I was just curious about this other needle since I've read so many positive things about the N3CH.
__________________
Mike
2011 300 Nambotin Replica
2001 Gas Gas 321 Trials bike
2010 BMW F800GS
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Needle question for Jakobi? desertgasser300 Enduro Intake/Carburetion - 2 stroke 3 04-07-2013 04:26 PM
Gas tank marking Binni General Discussions & Announcements 6 04-13-2011 05:56 PM
needle question stainlesscycle Enduro Intake/Carburetion - 2 stroke 19 07-15-2010 09:08 AM
Needle Question biggstr6 General Discussions & Announcements 2 04-30-2010 04:12 PM
Needle question? JoshP Enduro Intake/Carburetion - 2 stroke 8 03-22-2007 10:10 PM




All times are GMT -5. The time now is 05:19 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org