|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
2011 SixDaze Snapped FootPegs.
This happened last weekend during a typical single track ride through Arizona at an uphill rocky dry waterfall.
It was replaced with a set of Pro Taper pegs... |
#2
|
|||
|
|||
The stock pegs are the same pegs found on Honda CR's and Yamaha YZ's,, in fact my 03 had a part # on it that I could search in Honda's computer for a fast emergency replacement. They dont take much abuse on the Jap bikes or the spanish ones in the rocks.. the ones your mounting look good and tough tho..
__________________
Steve 16 Beta 350rr 04 KTM 525 sx/exc gone 03 KTM 625 sxc-rehab unit-did its job and now gone 03 GG 250 ec-gone 97 GG 250 ec Gone |
#3
|
|||
|
|||
These pegs are for a yz. I had a set of pegs laying around for a honda crf and a kx. They were not even close to the same mounting as the Gasgas.The yz pegs look to be a exact match, and fit perfect. The stock pegs are not the same as crf in construction as my spare stock honda pegs are bent and dented and this pot metal design just snapped off when the bike fell over sitting still.
|
#4
|
||||
|
||||
My son broke his right side peg on his 3rd tank of gas. Luckily there was a late model Yamaha here that refused to start. We cannabilized his Warp 9 peg so my boy could keep riding. It fit OK but didn't pivot up very far before it contacted the brake pedal. Later I got my neighbor to weld the OEM peg back together until we can get some Fastway pegs.
I think there's two things that cause the breakage: poor metalurgy and the brake pedal contact. |
#5
|
|||
|
|||
Poor metalurgy: The fracture on that peg looks very "pot-metal-ish."
|
#6
|
||||
|
||||
Yep. It's very porous.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moose footpegs | REVERUP | Enduro Chassis & Body | 9 | 07-29-2011 08:21 AM |
Sagging footpegs | PEB | Enduro Chassis & Body | 3 | 06-05-2010 04:49 PM |
Snapped bars | coolum74 | General Discussions & Announcements | 2 | 03-29-2009 02:35 PM |
Snapped valves on 02 400 | douglase1983 | Enduro Engine 4 stroke (including EFI & Exhaust) | 3 | 01-10-2009 01:33 PM |