Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 04-18-2008, 08:26 AM
jack1234 jack1234 is offline
Member
 
Join Date: Apr 2008
Posts: 1
Default FSE 450 cutting out

Hi all,

I bought a 450FSE a while ago, however, recently when I've been riding it the bike will just cut out and I lose all power. I have to stop, then start it up. It tends to start up no problems at all. It's had a bit of work done but nothing extreme.

Was just wondering whether anyone else has had this problem with the

If anyone could suggest anything, that'd be fine. I've given it to the local mechanic, who has found a few problems with it. Fixed them, but it hasn't fixed this problem.

Thanks in advance.

Jack


Reply With Quote


  #2  
Old 04-18-2008, 11:20 AM
bergerhag's Avatar
bergerhag bergerhag is offline
Gold Level Site Supporter
 
Join Date: Nov 2006
Location: Timr?, Sweden
Posts: 675
Default

try swapping the fuel pump relay for the fan relay. They are behind the right side panel.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
cutting out at wot stainlesscycle Enduro Intake/Carburetion - 2 stroke 13 07-17-2010 08:21 AM
Safest/Easiest Way To Carry Trail Cutting Tools... tprnottp General Discussions & Announcements 1 01-01-2007 08:05 PM
cutting the mufler wmd Enduro Engine - 2 stroke 12 08-24-2006 02:14 PM




All times are GMT -5. The time now is 09:32 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org