Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 04-21-2008, 04:29 AM
Bearman's Avatar
Bearman Bearman is offline
Senior Member
 
Join Date: May 2007
Location: Victoria, Australia
Posts: 199
Default

Bike year & model = 2003 EC200
Temperature (degF) = 68 - 100
Elevation (feet) = 1300 – 2500 ( roughly varying )
Main jet = 178
Pilot jet = 48
Needle & notch = N3HJ - 2
Air screw setting = 2 3/4
Throttle valve/slide = 5

Results: I use this setting all year round. I have found that it is very smooth from bottom to top. Air screw was 3 ¼, but wouldn’t idle when warm, now at 2 3/4. I’m considering moving needle to middle notch for better bottom end. Am using Motul 800 mixed at 50:1.
__________________
Ben

'03 GasGas EC200 My bike
'89 Yamaha TT250 R.I.P - Lost in the Black Saturday Fires
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
The jetting database needs your help! MattR General Discussions & Announcements 4 10-18-2017 05:34 PM
JD Jetting settings for linear power delivery? SpeedyManiac Enduro Intake/Carburetion - 2 stroke 5 04-06-2010 06:17 PM
Modification/Aftermarket Database SpeedyManiac Enduro Product Reviews 4 02-04-2009 07:09 AM
Jetting Database Announcement MattR General Discussions & Announcements 0 12-18-2008 08:58 PM
Jetting Database Summary MattR Enduro Intake/Carburetion - 2 stroke 0 12-18-2008 08:36 PM




All times are GMT -5. The time now is 08:20 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org