GasGas stator

[bonkeye]

In need of a GasGas EC300 2000 model stator (2k3 or better) also if you got the impulse coil aswel i might take that off your hands aswel


Needs to be in the UK



Thanks
Mark.

[Diggs345]

Originally Posted by bonkeye

In need of a GasGas EC300 2000 model stator (2k3 or better) also if you got the impulse coil aswel i might take that off your hands aswel


Needs to be in the UK



Thanks
Mark.

West Country rewinds will sort that out for you

[Diggs345]

Or these
http://www.electrexworld.co.uk/cgi-b...rch&PR=-1&TB=A

[motopsycho87]

I just paid ?110 for a new one from electrex and it turned out it wasn't the problem at all, so I have a spare in the UK.

And even though it is not listed as fitting the ec300, the one you want from electrex is the g146

[bonkeye]

sorry i forgot i posted this on here but i ended up buying one from electrex world

bike is back working again after the old stator died but still has the 3/4 throttle splutter which i was hoping to have been the stator but it wasnt DOH !

[motopsycho87]

if it's a splutter at a specific rpm which then clears up, it is more likely jetting, raise or lower your needle?