|
Parts New/Used Components and All Bike Part Outs |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
complete part out 2011 GasGas 300
I am pretty sure I am going to go ahead and part out my 300 that is for sale here in the classifieds. Here is the deal. I am going to go ahead and list everything up but I will not disassemble or actually take money for any parts until the engine and forks/triple clamps are sold. Once these are spoken for and I have received payment I will continue the part out until all is gone. If you want to call dibs on a part that is fine. I will put you as first in line. I just do not want to have to refund money if I can not sell the big ticket items.
I will try to list all parts I can think of. If you want something not listed just ask. All prices will be without shipping. I will charge actual shipping unless you want me to estimate. Actual shipping cost will be cheaper. I will accept postal money order or paypal. If using paypal gift option then no fee if not the add 3%. engine-complete with Rekluse billet clutch basket, new yz kickstart,RB modded head. apprx. 150 hours total. apprx 40hrs on current top end. runs great no problems $1500 or $2000 with Rekluse core EXP2.0 with low hour Rekluse cr fibers. Complete Sachs forks with TTX cartridges and triple clamps $1100 if you want the forks with Sachs internals only $600 Sachs internals $150 TTX cartridges $600 Rekluse Core exp 2.0 $500 carb 38mm $150 Bullet Proof Radiator Gaurds-silver- fits many year models check with BPD -$100 Front and rear wheel with rotors, sprockets, rim locks Tires optional. $250 each or $450 for the set. Motosportz submount damper $275 Brand new Leo Vince silencer never ridden with - $100 front brake complete $100 rear brake complete $100 2011 frame with mso $200 subframe $75 swingarm $100 Linkage with stock pull rods- bearings are fresh $100 LTR shorter pull rods (makes rear higher and stiffer) 120mm $50 stock tank with new petcock $100 Clarke 3.2 Gallon tank with petcock $100 Radiators $150 for the set stock pipe and eline cf gaurd (small dent just above gaurd) still very good shape $100 Seat with Guts tall soft foam and Guts cover with small patched tear $50 front axle $25 rear axle $25 all plastics and airbox/ rubber intake boot (missing mudflap) $100 cdi $65 Coil $40 ee aluminum skidplate $25 I am sure I am forgetting some stuff so just ask. If you want a package deal for example frame,sub , plastics etc. just ask. I will list my paypal once the engine and forks are spoken for. I can send pics on request or just look at pics on my ad in used bikes for sale. |
#2
|
||||
|
||||
Rear wheel
I will take the rear wheel if you end up parting it out.
Thanks Harold |
#3
|
|||
|
|||
I hate to see this happen to a beautiful bike.
|
#4
|
|||
|
|||
put me in line for the plastic, id like to see pics. if you sell the motor and forks contact me thanks
|
#5
|
|||
|
|||
If you decided against the plastics Andykr, I'd like next dibs?
|
#6
|
|||
|
|||
damper has been spoken for also if part out goes through.
I also kind of hate to see it but I just think it is the best option. If you want to speak for something post in this thread so everyone can see who spoke first. I went through some drama parting a KTM 200 on KTMTALK a couple years back. Like I said pictures can be seen in my for sale thread. I will try to post link. If you want specific pics just let me know. |
#7
|
||||
|
||||
Could be interested in parts. Postal will be killer
|
#8
|
|||
|
|||
Quote:
__________________
'05 EC200 |
#9
|
||||
|
||||
Here is a link for the bike......wow.....this is not going to end good!
http://www.gasgasrider.org/forum/showthread.php?t=15777
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#10
|
||||
|
||||
I'll take the whole thing.
PM sent. |
|
|