![]() |
#1
|
|||
|
|||
![]()
After much thought I have decided to part out one of my 2011 EC300s. Bike was rebuilt from the frame up (engine as well) this spring and has seen 30 hours since. Below is a partial list of some parts, but everything will be available.
Crank rebuilt by Ken O'Connor racing Replated cylinder Ohlins TTX shock Silicone rad hoses with aftermarket cooler Front and rear brake setups with new braided lines Plastics and seat S3 head with various inserts Trusty adjustable power valve cover Some electric start parts (flywheel, engine covers, subframe) House of Horsepower pipe and silencer! Will work on getting some pics on an image hosting site, but for the time being I can send them via text message. PM me through this site with parts requests. If you contacted me earlier and I did not have the parts, I may have them now due to the decision to part this machine, feel free to contact me again. Thank you. Kris
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ Last edited by risk74; 11-05-2019 at 06:47 AM. |
#2
|
||||
|
||||
![]()
PM sent.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#3
|
|||
|
|||
![]()
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ |
#4
|
||||
|
||||
![]()
How much on the shock and powervalve cover
|
#5
|
|||
|
|||
![]()
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ |
#6
|
||||
|
||||
![]()
pm sent. thanks
__________________
07 EC 300 ![]() 06 Gold Wing ![]() (2) 06 CRF 150 F |
#7
|
|||
|
|||
![]()
PM sent on frame and swing arm.
|
#8
|
|||
|
|||
![]()
PM'd for Estart bits
|
#9
|
|||
|
|||
![]()
I'm trying to be as fair as possible selling these parts on a first come first serve basis, but as I have had several requests for the same parts I am going to go in order of initial contact. If you don't want a part, let me know so I can move to the next person on the list. Thanks!
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ |
#10
|
|||
|
|||
![]()
More EC300 stuff, click on the links to see the photos.
Complete seat, Gutz tall foam and seat cover, minor wear and tear on cover, seat pan is very good no cracks. https://photos.app.goo.gl/tyL4E74Sx3oMzvm27 https://photos.app.goo.gl/4pjmX3NyooRSwZyMA $60 shipped in the continental US Enduro Engineering rear brake caliper mount and rotor guard, very good condition, excellent protection for that rear rotor. $55 shipped in the continental US https://photos.app.goo.gl/4ksrtfBPLdmWkFXUA Vforce 3 reed cage. Excellent condition. Reeds were replaced in the spring, less than 30 hours since. $60 shipped in lower 48 states. https://photos.app.goo.gl/99sKDTUvHdRSsgyaA More photos available upon request.
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Thinking about parting out 2000 ec300 | Loosenut | General Discussions & Announcements | 6 | 06-17-2012 01:46 PM |