|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
ttx forks
Which ttx forks are on my 2010 Nambo 992's or 1082's ?
__________________
Claude 2019 XC300 2010 Nambotin 300 sold '07 EC300 sold '06 EC300 sold '78 Suzuki RM250C2 '75 Yamaha YZ250B sold |
#2
|
||||
|
||||
FGGG 1182 - 2010/2011 EC250/300 (Suspect 45mm Marzocchi)
FGGG 1282 - 2012 EC250/300 (48mm Marzocchi) FGGG 1283 - 2009 to 2012 EC250/300 (48mm Sachs) FGGG 992 - 2009 EC300 Info from HardRacing.com 2010 Nambo I believed used the Sachs outers so I'd be aiming at 1283 |
#3
|
||||
|
||||
They are Sachs. So 1283's. Now I need to find the setup/install manuals. Thanks
__________________
Claude 2019 XC300 2010 Nambotin 300 sold '07 EC300 sold '06 EC300 sold '78 Suzuki RM250C2 '75 Yamaha YZ250B sold |
#4
|
||||
|
||||
Fggg1182 are Sachs 10-11, they are superseded. The 1283 are the new Sachs models that jakobi got.
Your nambo will have 1182 Edit, they could be 1082, it seems to be a year thing.
__________________
Oz Current. 2015 ec300r estart, 98 RM 125 2013 Ec300r 2011 Ec300e 2009 Husky TE310 1982 XR500 Honda 1981 KE100 Kawasaki 1978 GT80 Yamaha Last edited by Simmo737; 04-13-2012 at 11:28 PM. |
#5
|
||||
|
||||
So you got the 1182 Simmo?
For the 1282 I can tell you set up info is as follows.. Rebound damping 15 clicks Compression damping 15 clicks Spring preload 2mm Fluid volume 280mm Spring preload change -2 to 8mm (adjusted by adding/removing washers) Fuid volume range 250mm - 350mm |
#6
|
|||
|
|||
What mods are needed to run the TTX cartridges that fit in a KTM in the Sachs forks or can the TTX be modified to work?
|
#7
|
||||
|
||||
If the forks were the same length then you might just maybe get away with buying the sachs base plug. You'd need to pull everything apart and lay it all on a table to know for sure. The TTX in itself is quite a simple installation.
|
#8
|
||||
|
||||
Just out of curiosity what was the price tag on the TTX
|
#9
|
||||
|
||||
Hard racing can do them for $1059 I think. Thats just inserts. Then you're up another $100 for springs and a few bucks for oil. I think Coppersmiths asks $1200 plus springs, but they list them as Tuned so they may or may not revalve based on what you discuss with them.
|
#10
|
|||
|
|||
Price is about $1000 US
__________________
2003 txt250 Pro 2013 Ossa 280i |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
43 mm wp forks. | jhendr3702 | Enduro Suspension | 4 | 10-18-2010 06:46 PM |
2003 400 FSE WP Forks | lukemillar | Enduro Suspension | 0 | 05-28-2010 08:59 PM |
forks | sen480 | General Discussions & Announcements | 1 | 03-25-2010 04:54 AM |
which forks have i got?! | tommo | Enduro Suspension | 3 | 12-29-2009 02:53 PM |