Brakes

[redrider7202]

So, rear pads are pretty much gone, so they need to be replaced and when i managed to get the pins to start to come out, they are pretty well worn.

I know the pads are off a CR, but does that mean the pins will be a crossover as well?

[cbutler]

I buy breaks and pine for the XR400. I would think the CR pins are the same also. These have worked well for the last 4 months they have just started to show wear on them.

http://www.rockymountainatvmc.com/pr...#vehicleSelect

[redrider7202]

Alright, issue is they are shot now, and i need them for next weekend, so i'm stuck with what the local dealers have in stock. Not really any local gasgas dealers so i'm off to a honda-suzuki-kawi place tomorrow in hopes they have something in stock. kinda funny, my old xr250 never showed wear

[noobi]

Yes the pins do work, iv got aftermarket hex head pins on my 125.

[eff]

Look at the Moose Racing site and look at the brake pads. That will give you all the crossovers. Look for all the bikes with the same part numbers as the GG, ie CR's.

[redrider7202]

yea, i sat down with ebc site and there are alot of crossovers. I wish i had done what my plan was and switched the pads and pins over from my XR to the GasGas. oh well, sold it so that's not an option now. off to the stealer after class. Although, when u figure in 7 bucks to ship them it's worth it.