Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-20-2020, 07:16 AM
emepher emepher is offline
Member
 
Join Date: Jun 2018
Posts: 14
Default HELP: 2018 GGEC300 Removing starter area conical gear and bearings

Recently found my bearing seized and the conical gears are not spinning. I sprayed penetrant and unseized the bearing but want to replace it. In what order are they removed and how?
Attached Images
File Type: jpg conical gear 2.JPG (19.7 KB, 60 views)
File Type: jpg conical gear.jpg (64.5 KB, 65 views)


Reply With Quote


  #2  
Old 02-20-2020, 07:37 AM
Nocams Nocams is offline
Member
 
Join Date: Feb 2016
Posts: 83
Default

I used heat on the starter casting and a few firm taps on the edge of the workbench.
Came out nicely.
__________________
2011 TXT300R
2018 EC300GP
Reply With Quote
  #3  
Old 02-20-2020, 03:32 PM
fred99999au fred99999au is offline
Member
 
Join Date: May 2018
Posts: 93
Default

yep, heat around the outside of the case where the bearing lives.

I also made a tool to fit behind the pinion section of the shaft that fitted onto a slide hammer. This helped.
Reply With Quote
  #4  
Old 03-03-2020, 08:28 AM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default

Hi, is your shaft welded to the gear? Was it come this way or did you do it after?

Thanks.
Reply With Quote
  #5  
Old 03-20-2020, 05:32 AM
JoseGas25's Avatar
JoseGas25 JoseGas25 is offline
Member
 
Join Date: Mar 2020
Location: Spain
Posts: 7
Default

Hello, I used this "tool". Nut and screw. I removed also the gear that is fixed with the axis but i don?t know how to explain in english, sorry.
Attached Images
File Type: jpg sacar rodamiento.jpg (103.2 KB, 70 views)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
400fse-450fse Starter gear and one way clutch mod krolik_21 Enduro Engine 4 stroke (including EFI & Exhaust) 5 08-22-2019 05:58 PM
2013 XC300R-E starter gear rosco "Wanted to Buy" & "Want To Trade" 2 04-11-2019 08:36 PM
Kick starter gear with zip ties CanGasser Enduro Engine - 2 stroke 4 01-07-2017 03:48 PM
2012 starter gear how much !!!!! Watty Enduro Electrical & Wiring 4 11-22-2014 01:43 PM
Starter clutch / gear problem iancp5 Enduro Engine 4 stroke (including EFI & Exhaust) 12 01-28-2011 02:45 PM




All times are GMT -5. The time now is 07:31 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org