|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
2008 gas gas electric start
I bought myself an electric start system for my 2008 gas gas ec200. It is complete aside from some wiring. I have some of the electrical for it but not all of it and I?m wondering a few things about wiring it in.
Can I run power straight from the stater to the battery to charge it? Or do I need to rectify it? And from there can I simply run an on off button to my starter? I?ve done wiring on vehicles and lights and from what I know it should work but the way gas gas has it from factory seems much more complicated. And info or ideas would be greatly appreciated! Thanks, Jer |
#2
|
||||
|
||||
I just did this swap on my '11 earlier this year. The wiring diagram I used to wire mine in was for a 2013 XC model. I have a copy if you need it.
The e-start bikes do have a rectifier to charge the battery and it must be used. You could wire in a cheap Amazon/Ebay rectifier that's capable of handling whichever stator you have.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#3
|
|||
|
|||
Quote:
|
#4
|
||||
|
||||
That's your starter relay. It goes between the positive on your battery and the starter. Your handlebar start switch controls it. You're still going to need a regulator/rectifier for charging. BTW, do you have the 2k2 or 2k3 stator? You'll need the bigger one for charging a battery IIRC.
Sorry, but it was the 2015 manual I used for wiring. Here is a download link: https://drive.google.com/file/d/1h9-...ew?usp=sharing I think it's page 21 you need. Make sure the schematic is listed for the 250/300 e-start models.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#5
|
|||
|
|||
Okay I see, I?m not sure what stator I have as I?m not sure how to tell but I?ll attack an image of it in case that helps. My dad has a 2009 ktm 300 that has had the e start deleted so I can probably use the regulator from it I?m assuming? I didn?t have time to fully look into the wiring on my bike but I don?t think I have all the plugins I need so there will probably have to be some jimmy rigging.
|
#6
|
||||
|
||||
Quote:
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Electric start help please! | SS109 | Enduro Electrical & Wiring | 3 | 08-28-2019 12:11 AM |
Electric Start Sub-frame | jcs003 | Parts | 18 | 05-09-2018 07:40 AM |
Adding electric start to 125 .. | welsh.Z.S. | Enduro Electrical & Wiring | 1 | 05-07-2017 12:08 PM |
Will there be an electric start for 2012 | nmrider | General Discussions & Announcements | 5 | 09-19-2011 03:04 PM |
New 2011 Gas Gas EC 300 (Electric Start) | onegreyghost | General Discussions & Announcements | 32 | 08-31-2010 07:23 PM |