|
Parts New/Used Components and All Bike Part Outs |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Rear Subframe and components 04 EC 200
I have a rear subframe, seat, airbox, number plates, rear fender, and front fender. I also have a front red headlight for an 04 EC 200. Is anyone interested?
You can see what I am about to do.
__________________
2013 GasGas 300 2004 GasGas 200 2011 GasGas 300 Ortonville Minnesota |
#2
|
||||
|
||||
seat
is that a regular or tall seat? My buddy has my old bike with a tall seat on a modified subframe hes looking for a regular seat and subframe assy.
If its a regular seat how much for it all shipped to mass? Which kit are you buying? I keep looking at them but so far have avoided the temptation. |
#3
|
||||
|
||||
Quote:
Subframe new is $400, and the Seat is $180 new. I believe the AC Racing Subframe is $200 i could be wrong. I figure, $175 for the airbox, the seat, the subframe and the rear plastics that go with it. Shipping will likely be $25. I am open to offers as I do not know what these typically go for. I will be getting the 2011 conversion kit. So it looks factory. I have an 11 300 that needs new plastics so this will be an easy way to make 2 look new!
__________________
2013 GasGas 300 2004 GasGas 200 2011 GasGas 300 Ortonville Minnesota |
#4
|
||||
|
||||
Quote:
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
#5
|
||||
|
||||
Quote:
If I was certain a up grade kit would fit my 99......I'd be tearing her down too.
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#6
|
||||
|
||||
You're a tank and a coil remount away from a transformation kit.
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
#7
|
||||
|
||||
Quote:
Thanks Noah
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#8
|
||||
|
||||
Sorry Rick, I forgot about the different water outlet on your head that needs to be changed out for a newer head. (compare pics of newer heads/outlets vs yours) Maybe you could modify it in some way?? Otherwise that should take care of it. Make sure the tank has the pocket for the upper shock mount (oem tanks pre 03'). I sure like mine now that it's done. Go for it! Edit (97-00 needs the 2011 style carb to air box boot)
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 Last edited by nknudsen; 10-14-2013 at 12:08 PM. Reason: Added air box info |
#9
|
||||
|
||||
Rick,
You need to remove the frame tab that catches the underside of your '99 seat base. Also the coil mount move. Then, get: 1. a 2000-2006 seat base (New OEM, the 2004 was the least expensive year. Also, if you move the mounting tabs, the Pampera base will work.) 2. a new tank (Tank for 2000-2002 will work best, but any through 2006.) 3. New shrouds to accommodate the tank. Your '99 200 head is the "new style" ("True" '99 and later design. "Early" '99 250 used the earlier cylinder and head; 200 and 300 all had "new" top ends.) with the shorter and smaller water inlet. It is fine as it is for a conversion to the 2000-2006 seat/tank/shrouds combo. Side panels are going to be either '94-2000 GasGas, or '96-'98 KX125/250. (UFO still makes them.) I hope that helps. Good Riding! Jim
__________________
Jim Cook Smackover Racing Team LAGNAF '11 Gas Gas EC250 (primary ride) '06 Gas Gas DE300 2004 Gas Gas TXT300 Pro '94 Husaberg FE350 '86 Yamaha IT200 '86 Honda TRL200 Reflex '04 KTM 525EXC (soon to be dual sported) Several others, including project bikes, Deb's bike, and a fleet of grandkids' bikes Let's go riding! http://www.jebruns.com/Wudi19/wudi19.html http://www.ahrma.org/schedules-results/cross-country/ |
#10
|
|||
|
|||
i'm keeping this link, just in case i go ahead with it :-p
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wtb; 2004 rear subframe | GasGasDreamer | "Wanted to Buy" & "Want To Trade" | 1 | 02-06-2013 06:16 PM |
How best to remove carbon from PV components? | d2w | Enduro Engine - 2 stroke | 9 | 02-21-2008 09:03 PM |
KX subframe... | infected | Enduro Chassis & Body | 10 | 02-04-2008 08:12 PM |
Subframe | MIKEWA | Enduro Chassis & Body | 0 | 11-02-2006 08:15 PM |