Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-06-2017, 08:31 AM
Mud-Ectomy's Avatar
Mud-Ectomy Mud-Ectomy is offline
Member
 
Join Date: Oct 2008
Location: Vancouver Island, Canada
Posts: 54
Default 2018 Ec300 Jetting Specs

Does anyone have any solid Jetting specs for the 2018 EC 300
Sea level, Hard Enduro stuff. A wee bit on the rich side ok.
Cheers


__________________
2018 EC 300
Reply With Quote


  #2  
Old 11-06-2017, 12:05 PM
CDN Rick's Avatar
CDN Rick CDN Rick is offline
Silver Level Site Supporter
 
Join Date: Jul 2016
Location: Niagara, Ontario
Posts: 439
Default

Quote:
Originally Posted by Mud-Ectomy View Post
Does anyone have any solid Jetting specs for the 2018 EC 300
Sea level, Hard Enduro stuff. A wee bit on the rich side ok.
Cheers
IIRC I believe all dealers were sent info on this.
Otherwise I'm sure GGNA will have info for you. Try reaching out to them and I'm sure they will have a jetting table or better for you.
__________________
2018 GasGas EnduroGP250
2018 GasGas TXT GP300
1994 Honda CR500 (Ice Racer)
Reply With Quote
  #3  
Old 11-06-2017, 09:30 PM
Adrian200xc Adrian200xc is offline
Member
 
Join Date: Jun 2014
Location: Portland, Oregon
Posts: 36
Default

I went a clip leaner. It helped a lot. I was going to try a leaner pilot but I got a lectron instead.
Reply With Quote
  #4  
Old 12-04-2017, 11:26 AM
Andrea#92's Avatar
Andrea#92 Andrea#92 is offline
Member
 
Join Date: Feb 2012
Location: Monza, Italy
Posts: 11
Default

Quote:
Originally Posted by Mud-Ectomy View Post
Does anyone have any solid Jetting specs for the 2018 EC 300
Sea level, Hard Enduro stuff. A wee bit on the rich side ok.
Cheers
My 2018 EC 300 here in Italy run very good with N2ZG 2^ 42-178 (0-10 degrees, 200-1000 mt)
__________________
GasGas EC 300 2018
GasGas EC 300 2008
GasGas EC 300 2015
GasGas EC 300 2012
GasGas EC 125 2011
GasGas EC 125 2008

www.enduropuro.it
www.youtube.com/user/AndreaGasGas92/videos
Reply With Quote
  #5  
Old 12-31-2017, 12:17 AM
chunkysoup's Avatar
chunkysoup chunkysoup is offline
Gold Level Site Supporter
 
Join Date: Dec 2015
Location: Arizona, USA
Posts: 28
Default

Quote:
Originally Posted by Adrian200xc View Post
I went a clip leaner. It helped a lot. I was going to try a leaner pilot but I got a lectron instead.
How do you like the Lectron on the 2018? What did it do for the power delivery?

My 18 power comes on way stronger then my 2011...
Reply With Quote
  #6  
Old 02-17-2018, 02:15 PM
Keg Keg is offline
Senior Member
 
Join Date: Aug 2006
Posts: 304
Default

NECJ #2
MJ 175
PJ 42
AS 1 1/4
1000ft alt
65 - 85 degrees f.
95-98 octane gas
__________________
EC300 2019 (11 Gassers owned, many more to go)
Reply With Quote
  #7  
Old 02-17-2018, 09:48 PM
Mud-Ectomy's Avatar
Mud-Ectomy Mud-Ectomy is offline
Member
 
Join Date: Oct 2008
Location: Vancouver Island, Canada
Posts: 54
Default

Thanks Keg I will give it a try.
Went out today with
178 Main
45 pilot
#1 standard clip
AS 2turns out
And had a bog off of idle
Thanks for the help
Martin
__________________
2018 EC 300
Reply With Quote
  #8  
Old 02-19-2018, 09:48 AM
memphis2857 memphis2857 is offline
Senior Member
 
Join Date: Aug 2011
Posts: 970
Default

Anyone tried the N3CH needle yet? It worked very good in the previous models. Rode my 18’ for the first time yesterday and the N1EF needle is just awful. Zero bottom end and then explodes into mega power in the mid to top. Makes it nearly unrideable in anything technical


Sent from my iPhone using Tapatalk
Reply With Quote
  #9  
Old 02-19-2018, 11:40 PM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

Quote:
Originally Posted by memphis2857 View Post
Anyone tried the N3CH needle yet? It worked very good in the previous models. Rode my 18? for the first time yesterday and the N1EF needle is just awful. Zero bottom end and then explodes into mega power in the mid to top. Makes it nearly unrideable in anything technical


Sent from my iPhone using Tapatalk
I have the N3cj in mine, still slightly spoogy down the pipe running stock jets, 42/175 but sings nicely everywhere else. I?ll throw a 40 pilot in when I can be bothered to clean it right up.
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #10  
Old 02-20-2018, 03:21 PM
Gottsell Gottsell is offline
Member
 
Join Date: Jan 2018
Posts: 28
Default

Has anyone tried Suzuki needle necj?
In my old yz250x ?16 i run n3ew and n3cw maybe that works for gg300.?
I dont like the stock jetting in my gg300?18 way to rich for level.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Revised Jetting Specs NEDW Jakobi Enduro Intake/Carburetion - 2 stroke 197 09-19-2014 08:17 AM
'06 EC300 stock handlebar specs? brider Enduro Chassis & Body 0 09-16-2013 03:08 PM
What is the stock 200 needle and jetting specs shaheeb Enduro Intake/Carburetion - 2 stroke 3 03-24-2012 10:56 PM
2010 EC300 Factory Jetting Specs - WTF? JP4 Enduro Intake/Carburetion - 2 stroke 197 07-04-2011 11:03 AM




All times are GMT -5. The time now is 07:13 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org