Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-04-2020, 07:48 AM
masterbill masterbill is offline
Member
 
Join Date: Mar 2016
Posts: 79
Default Float valve.

Hello,

Two bikes 2006 EC 300 and 2014 EC 250.

Does anyone know if the float valves are the same in the round top carb and the AS2 ?

Cheers Bill


Reply With Quote


  #2  
Old 07-05-2020, 09:28 AM
Jacob 'Berg Jacob 'Berg is offline
Senior Member
 
Join Date: Mar 2014
Location: Scottsdale, AZ
Posts: 589
Default

Quote:
Originally Posted by masterbill View Post
Hello,

Two bikes 2006 EC 300 and 2014 EC 250.

Does anyone know if the float valves are the same in the round top carb and the AS2 ?

Cheers Bill
Nope, screwtop has deeper float bowl. Height should be 16 mm, I believe, or seam parallel with bottom of carb body. Short body carb height is approximately 6mm, most run a tad lower, I run mine at 7.5mm.
Reply With Quote
  #3  
Old 07-05-2020, 11:36 AM
masterbill masterbill is offline
Member
 
Join Date: Mar 2016
Posts: 79
Default

Thanks for the reply but I mean are the actual valves the same.

i.e the part that shuts off the fuel.

Cheers Bill
Reply With Quote
  #4  
Old 07-05-2020, 05:12 PM
SS109's Avatar
SS109 SS109 is offline
Senior Member
 
Join Date: Jan 2011
Location: Tucson, AZ
Posts: 987
Default

According to Jets-R-Us all dirt bike PWK's from 33mm to 41mm share the same float. https://www.jetsrus.com/carburetor/a...selection.html
__________________
WildAzzRacing YouTube channel
Trail Riders of Southern AZ club
AZ State Parks OHV Ambassador
'11 EC250R
'98 KDX220
Reply With Quote
  #5  
Old 07-06-2020, 02:36 AM
masterbill masterbill is offline
Member
 
Join Date: Mar 2016
Posts: 79
Default

Hello,

Thanks for that .

Cheers Bill
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
float level masterbill Enduro Intake/Carburetion - 2 stroke 0 04-01-2020 05:32 AM
Float valve seat removal...? Davehuge Enduro Intake/Carburetion - 2 stroke 19 09-29-2017 04:45 PM
How to set float rzide Enduro Engine - 2 stroke 3 01-22-2014 10:51 PM
Float Fix gasser Enduro Intake/Carburetion - 2 stroke 1 03-29-2009 10:32 AM
KEIHIN float valve nhrider Enduro Intake/Carburetion - 2 stroke 1 06-17-2008 01:10 PM




All times are GMT -5. The time now is 02:52 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org