Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-01-2012, 02:06 AM
wence's Avatar
wence wence is offline
Bronze Level Site Supporter
 
Join Date: Nov 2008
Location: Adelaide South Australia
Posts: 1,159
Default Supermoto.

Just a quick question as to what rims will adapt to our Gassers?
I assume anything will fit with the spacers being adapted or am I wrong.
I know the disc and sprocket need to be the same but do not know what that is.
Anyone done this or got the info?
Cheers Mark


__________________
Xr 250 ( first bike)
98 Rmx
2007 Gas gas 300(swapped for trials bike)
2008 280 Raga replica
2012 Gas gas ec 300 E
Reply With Quote


  #2  
Old 11-01-2012, 12:30 PM
gassergrant gassergrant is offline
Senior Member
 
Join Date: Jun 2011
Location: Herts England
Posts: 428
Default

Hi i used ccm 404 wheels. it came with a ccm bracket and i used a brembo caliper and master cylinder from a ktm or husky i think. i just swap it around.
i got some spacers made for the front
the back i changed the larger wheel bearing for the gg one and added the spacer that sits in between the two bearings and it all fits
the biggets tyre you can it on the rear is a 150 or it will rub on the swing arm
Reply With Quote
  #3  
Old 11-01-2012, 12:37 PM
gassergrant gassergrant is offline
Senior Member
 
Join Date: Jun 2011
Location: Herts England
Posts: 428
Default

IMG_0227.jpg

IMG_0228.jpg

IMG_0229.jpg

this is my 300 with the ccm wheels
Reply With Quote
  #4  
Old 11-01-2012, 01:34 PM
wence's Avatar
wence wence is offline
Bronze Level Site Supporter
 
Join Date: Nov 2008
Location: Adelaide South Australia
Posts: 1,159
Default

Looks good mate.
Where would I get these CCM wheels and roughly how much are they?
Also, where would I find brakes etc and what should I be looking for?( I know you said brembe , but any specific type?)
Cheers Mark
__________________
Xr 250 ( first bike)
98 Rmx
2007 Gas gas 300(swapped for trials bike)
2008 280 Raga replica
2012 Gas gas ec 300 E
Reply With Quote
  #5  
Old 11-01-2012, 03:59 PM
Harry's Avatar
Harry Harry is offline
Senior Member
 
Join Date: Nov 2006
Posts: 301
Default

Looks very nice.
I would like to get a similar set for mine. Could you please list the tyre and rim sizes for the front and rear?

Thanks
Reply With Quote
  #6  
Old 11-01-2012, 04:48 PM
gassergrant gassergrant is offline
Senior Member
 
Join Date: Jun 2011
Location: Herts England
Posts: 428
Default

Hi Mark

i found my wheels on ebay, ccm is a British made bike, not even sure they are still being made, not sure if you guys imported them ether.
they use ajp hubs that is why i went for them so i new there would not be much to mod.
Talon make hubs for gg and rims the are a few to choose from. i just did not want to spend the same amount on wheels as my bikes worth lol
early ktm wheels i think may fit and Suzuki drz sm wheels might, huskys have the same spindle size i think and used ajp hubs. it just a case of research on what has the same spindle size.
regarding the brake again husky,ccm or early ktm bolt straight on. there is a fella here in the uk that can get a bracket made to fit the nissin caliper (?50 ruffly) as for wheel spacers i got my mate to turn me some out on his lave.
i will get all the part number and post them in a few days and the bits you want as well Harry

i nearly gave up on this, but fell together thank god, the bike is the nuts on sm wheels. well worth the hassle, if you guys need any help just ask an i will do my best

grant

Grant
Reply With Quote
  #7  
Old 11-02-2012, 03:07 AM
wence's Avatar
wence wence is offline
Bronze Level Site Supporter
 
Join Date: Nov 2008
Location: Adelaide South Australia
Posts: 1,159
Default

Thanks mate , that would be great.
Cheers Mark
__________________
Xr 250 ( first bike)
98 Rmx
2007 Gas gas 300(swapped for trials bike)
2008 280 Raga replica
2012 Gas gas ec 300 E
Reply With Quote
  #8  
Old 11-06-2012, 10:37 AM
gassergrant gassergrant is offline
Senior Member
 
Join Date: Jun 2011
Location: Herts England
Posts: 428
Default

soz to keep you gents waiting, will get the info tomorrow for ya. just have not stopped

grant
Reply With Quote
  #9  
Old 11-06-2012, 12:58 PM
wence's Avatar
wence wence is offline
Bronze Level Site Supporter
 
Join Date: Nov 2008
Location: Adelaide South Australia
Posts: 1,159
Default

I just bought a set of Morad motard wheels and all the kit as a kit from motocrosscentre in spain.
http://www.motocrosscenter.com
Antonio was great to deal with and they come in pretty well priced too.
Cheers Mark
__________________
Xr 250 ( first bike)
98 Rmx
2007 Gas gas 300(swapped for trials bike)
2008 280 Raga replica
2012 Gas gas ec 300 E
Reply With Quote
  #10  
Old 11-06-2012, 08:19 PM
nato nato is offline
Senior Member
 
Join Date: Sep 2011
Posts: 360
Default

Whats the postage prices like from them wence? That replica plastics kit looks horn!!
__________________
Does this rag smell like chloroform?
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gas Gas Supermoto Wheels (UK) Ryan_250 Parts 6 03-28-2013 08:41 AM
supermoto wheels gassergrant Enduro Chassis & Body 0 06-21-2011 10:34 AM
Supermoto DaveJ General Discussions & Announcements 2 02-19-2007 10:11 AM




All times are GMT -5. The time now is 12:08 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org