#31
|
||||
|
||||
I am interested in the front/rear axles.
Do you (or anyone) know if they will fit my 2014 300?
__________________
Slade '14 GG XC300R - County Cycle Woods Weapon #63 |
#32
|
||||
|
||||
Still have the pegs, minus the bushings. Actually I do have the bushings but I cut them in half to facilitate the peg-lowering trick.
J
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public |
#33
|
||||
|
||||
I do have them, not sure if they will fit or not ?
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public |
#34
|
||||
|
||||
UPDATED 8 27 16
Engine minus Stator and Flywheel (top end, bottom end, reeds) Able to provide video of the engine running just prior to part-out. $800 SOLD Pipe OEM. One very small dent-can send pics. The pipe was dented prior to my adding a P3 when I got the bike. $100 SOLD Sachs Shock. Sprung for 200lb rider weight. Valved for rocks/very soft. 0.5hrs since servicing. $100 Triple Clamps $75 SOLD FMF Turbine Core 09 200. Same part # stamped on the Silencer as my 300 $80 Wheels 09 200. $300. One dent to rear rim. OEM Plastics 09 200. In "ok" condition. Plastics are really good, OEM graphics pealing up in a couple spots. $70 SOLD Scorpion Rad Guards $75 SOLD- OEM Radiators. In good condition. Straight. Inner-most column slightly compressed. No leaks. Rads were compressed when it was a demo. $100 Front Brake complete with lever $150 SOLD Aluminum Skid Plate (gasgas) $40 Rear Brake complete with lever $150 Clutch complete, MC, Slave, Lever and Line $100 SOLD OEM Tank with Cap and Petcock. Some discoloration $75 Carb OEM. Jets, Needle, Cable not included $150 OEM Throttle Cable $15 Motion Pro +3" Throttle Cable $15 Subframe (metal portion only, no plastic/airbox etc) 09 200 $150 SOLD-Frame with Title $200. Had the kickstand/roller bracket re-welded when it cracked off in 2013. Swingarm- has defect where a bolt that was too long (installed by yours truly) wore into the material $50 Front/Rear Axles $40 SOLD CDI $40 Airbox 09 200 $ 20 Seat, no tears/normal wear $50 SOLD Full Linkage-new bearings. $100 GPR Sub-Mount kit (including collar and post). Stabilizer not included $50 OEM Chain Guide $10 SOLD-MAP Switch $10 SOLD OEM Bar Mounts $10 Bucket of Bolts. 75% of the bolts, nuts, fasteners, etc. Basically all the bits left-over after the part-out $40 OEM Handguards/Plastic Deflectors (removed at 5hrs) $5 SOLD OEM Wiring Harness $50 This will take a few extra days as I will have to remove the Sicass portions. SOLD Sachs Forks-Red with hard-mounted Motion Pro Bleeders. $ make an offer. Selling to be used for parts, not to be ridden. In fact I may disassemble prior to shipping. Sicass Dual-Sport Lighting Kit. I might consider selling this (also considering putting it on my 200). __________________ __________________ 2010 300 ec. Loving it 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public Last edited by husley; Yesterday at 04:18 PM.
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public |
#35
|
||||
|
||||
UPDATED 09 03 16
Triple Clamps $75 Wheels 09 200. $300. One dent to rear rim. OEM Plastics 09 200. In "ok" condition. Plastics are really good, OEM graphics pealing up in a couple spots. $70 Clutch complete, MC, Slave, Lever and Line $100 Carb OEM. Jets, Needle, Cable not included $150 OEM Throttle Cable $15 Swingarm- has defect where a bolt that was too long (installed by yours truly) wore into the material $50 Front/Rear Axles $40 Airbox 09 200 $ 20 Seat, no tears/normal wear $50 GPR Sub-Mount kit (including collar and post). Stabilizer not included $50 OEM Chain Guide $10 OEM Handguards/Plastic Deflectors (removed at 5hrs) $5 Sicass Dual-Sport Lighting Kit. $200 http://sicassracing.com/store/produc...w_turn_signals
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public |
#36
|
|||
|
|||
Does the dual sport kit come with a headlight?
|
#37
|
||||
|
||||
Everything but.....
Sorry J
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public |
#38
|
|||
|
|||
I'll take the axles off of your hands, if CombatYoga doesn't want them.
Changing out tires, my front axle is fused to the bearing, I can probably save it, would be nice to have a spare incase I destroy it. Thanks!
__________________
2017 Beta 300RR Last edited by Mick; 09-08-2016 at 08:10 AM. |
#39
|
||||
|
||||
Quote:
The front will be different due to the lug changes between the Sachs and 48mm Marzocchis. I didn't investigate any further, as when I put my 48mm Sachs with TTX inserts on the 2013 I first tried the 13 axle, and when it didn't fit up used the old one. |
#40
|
|||
|
|||
Might have missed it, did the engine sell?
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2010 Partial Part Out - Seeking interest | Jakobi | Parts | 18 | 03-29-2016 09:15 PM |
Full auto | Clay | General Discussions & Announcements | 38 | 11-21-2012 09:07 AM |
GG 300 Race with full TTX | GasTimppa | Enduro Suspension | 21 | 05-21-2012 12:59 AM |
Air box full of oil | dukbil | Enduro Engine 4 stroke (including EFI & Exhaust) | 10 | 04-02-2009 08:46 PM |
Full throttle? | Krasi | Riding Techniques & Training | 8 | 01-29-2009 01:15 AM |