Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-13-2009, 06:44 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default Chain and Sprockets

I am going through my bike after a long summer break and I am behind on getting it put back togther. I needed to replace my entire drive system, after much thought and I decided to go back with aluminum rear sprocket after much debate within myself. I know that many of you guys like and use the Dirt Works Ironman drive systems, so I choose another route. My last set of sprockets were trashed. I had used AFAM rear with great results, much better over using the PBI which is what I am replacing now.

I ordered a kit, AFAM Workslite rear in a 51 tooth and the AFAM counter shaft 13 tooth and for the chain I went with the RK 520 XSO 120 links /with clip style masterlink.

I ordered everything from http://www.sprocketcenter.com/ for a very good price.

Rear Sprocket PN# 15206+51 for tooth size
Counter Shaft PN# 94313A+13N for tooth size.

The PN#15206 fits the following bikes:

Beta: 400/450/525 (2005-2006)

Sherco 450/510 (2004-2007)

Suzuki DR 350 SE (1994-1995)
DR 350 S (1990-1993)
DR 250 S (1990-1992)

Husky all through (1999-2006)125, 250, 360, 450, 510, 570, 610


__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote


  #2  
Old 12-13-2009, 01:28 PM
David Serres David Serres is offline
Member
 
Join Date: Nov 2009
Posts: 3
Default Chain & Sprocket Kit Gas-gas

Hello
I am from Greece and I have a GAS GAS 250 2008 model enduro and I want to change the front and rear sprocket and chain.
I want to know how many links should have the chain,
and where to order so to come to Greece?
Thanks
Reply With Quote
  #3  
Old 12-13-2009, 06:01 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default

As for parts in Greece??? I have no idea. The amount of links will depend on your sprocket combo. I know 13/51 works out to 116 links.

Good Luck
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
  #4  
Old 12-14-2009, 10:42 AM
David Serres David Serres is offline
Member
 
Join Date: Nov 2009
Posts: 3
Default

Thanks!!!!!!!!
Reply With Quote
  #5  
Old 12-15-2009, 10:08 PM
dudenstumpy dudenstumpy is offline
Member
 
Join Date: Sep 2009
Location: Glasgow, U.K.
Posts: 9
Default

I have found that it is best to buy a 120 link chain, size it up on your bike with your rear wheel at back the distance you want it and the slack you need, then to cut off / remove your excess links.

This avoids the costly and time consuming mistake of buying a chain that is too short.

I'm confident that any of the big U.K. accessories dealers will be able to send to Greece eg.

http://www.racespec.co.uk/acatalog/index.html

ps. a rivet remover tool is quite cheap to buy
__________________
2003 Gas Gas ec300
2007 Ktm 525 exc
Reply With Quote
  #6  
Old 01-12-2010, 11:35 AM
David Serres David Serres is offline
Member
 
Join Date: Nov 2009
Posts: 3
Default

I have a concern that the Sprockets wearing the ktm is the same as GAS GAS; This is because the shops are almost all ktm but not for gas gas
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Talon Sprockets 12-13-14 cal_tony Enduro Product Announcements 3 01-08-2009 06:24 PM
What other brand sprockets fit? socalscott Enduro Chassis & Body 6 12-03-2008 11:48 PM
chain slider / chain guide crossover? bondo General Discussions & Announcements 1 09-01-2008 09:13 PM
Sprockets Motarded1 Enduro Chassis & Body 17 05-25-2008 11:52 PM
sprockets and chain quadinfamily Other GasGas Bikes/Quads 1 04-06-2007 08:52 PM




All times are GMT -5. The time now is 09:13 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org